commit 8450ea80685c6fd6b8c5f889d176995893db112c
Author: FabricSoul <fabric.soul7@gmail.com>
Date:   Thu Dec 19 03:58:54 2024 -0500

    first commit

diff --git a/configuration.nix b/configuration.nix
new file mode 100644
index 0000000..bb36b1e
--- /dev/null
+++ b/configuration.nix
@@ -0,0 +1,125 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+{ config, pkgs, ... }:
+
+{
+  nix.settings.experimental-features = ["nix-command" "flakes"];
+  imports =
+    [ # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+    ];
+
+  # Bootloader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  networking.hostName = "Tatara"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Enable networking
+  networking.networkmanager.enable = true;
+
+  # Set your time zone.
+  time.timeZone = "America/Toronto";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_CA.UTF-8";
+
+  # Configure keymap in X11
+  services.xserver.xkb = {
+    layout = "us";
+    variant = "";
+  };
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.fabric = {
+    isNormalUser = true;
+    description = "fabric";
+    extraGroups = [ "networkmanager" "wheel" ];
+    packages = with pkgs; [];
+  };
+
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [
+    vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+  #  wget
+    greetd.greetd
+    greetd.tuigreet
+    xorg.xinit
+    libinput
+    libnotify
+  ];
+
+  fonts.packages = with pkgs; [ nerdfonts ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh.enable = true;
+  services.greetd = {
+  	enable = true;
+	settings = {
+		default_session = {
+			command = "${pkgs.greetd.tuigreet}/bin/tuigreet --time ";
+			user = "fabric";
+		};
+	};
+  };
+  services.xserver = {
+  	enable = true;
+    windowManager.i3.enable = true;
+    displayManager.startx.enable = true;
+    libinput.enable = true;
+    videoDrivers = ["nvidia"];
+  };
+  services.displayManager = {
+  	defaultSession = "none+i3";
+  };
+
+  hardware = {
+      graphics = {
+          enable = true;
+        };
+      nvidia = {
+          modesetting.enable = true;
+          powerManagement.enable = false;
+          powerManagement.finegrained = false;
+          open = false;
+          nvidiaSettings = true;
+          package = config.boot.kernelPackages.nvidiaPackages.stable;
+        };
+    };
+  programs.steam.enable = true;
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "24.11"; # Did you read the comment?
+
+}
diff --git a/dotfiles/i3/.config/i3/config b/dotfiles/i3/.config/i3/config
new file mode 100755
index 0000000..e39b69f
--- /dev/null
+++ b/dotfiles/i3/.config/i3/config
@@ -0,0 +1,617 @@
+# exec --no-startup-id ~/set_once.sh
+# This file is a modified version based on default i3-config-wizard config
+# source is available here:
+# https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/etc/skel/.config/i3/config
+# Maintainer: joekamprad [joekamprad //a_t// endeavouros.com]
+# https://endeavouros.com
+#
+# iconic font icon search: https://fontawesome.com/v4.7/cheatsheet/
+#
+# --> to update this run the following command (will backup existing setup file)
+# wget --backups=1 https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/etc/skel/.config/i3/config -P ~/.config/i3/
+#
+# Endeavouros-i3 config file
+# Source for complete framework of our i3 config and theming here: https://github.com/endeavouros-team/endeavouros-i3wm-setup
+# EndeavourOS wiki holds some Information also: https://discovery.endeavouros.com/window-tiling-managers/i3-wm/
+# Please see http://i3wm.org/docs/userguide.html for the official i3 reference!
+
+#######################
+# config starts here: #
+#######################
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+#font pango: Noto Sans Regular 10 
+font pango: FiraCode Nerd Font medium 10 
+
+# set the mod key to the winkey:
+set $mod Mod4
+
+#####################
+# workspace layout: #
+#####################
+
+# default i3 tiling mode:
+workspace_layout default
+
+# i3 stacking layout:
+# Each window will be fullscreen and tabbed top to bottom.
+#workspace_layout stacking
+
+# i3 tabbed layout:
+# Each new window will open fullscreen as a tab (left to right)
+#workspace_layout tabbed
+
+##############################
+# extra options for windows: #
+##############################
+
+#border indicator on windows:
+default_border pixel 1
+exec --no-startup-id thunar --daemon
+#exec --no-startup-id flatpak run com.github.vladimiry.ElectronMail
+#exec --no-startup-id "libinput-gestures-setup start"
+#exec_always --no-startup-id "echo $PASSW | sshfs -p 8022 u0_a114@100.65.217.31:/storage/B49B-1F11/Android/data/com.termux/files /home/flavio/server -o password_stdin"
+# thin borders
+# hide_edge_borders both
+
+# Set inner/outer gaps
+gaps inner 10 
+gaps outer 0 
+# for inserting password
+exec --no-startup-id /usr/lib/polkit-kde-authentication-agent-1
+# show window title bars (not officially supported with i3gaps)
+#default_border normal
+default_border pixel 2
+# window title alignment
+#title_align center
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# switch/iterate between workspaces
+bindsym $mod+Tab workspace next
+bindsym $mod+Shift+Tab workspace prev
+
+# switch to workspace
+bindcode $mod+10    workspace  $ws1
+bindcode $mod+11    workspace  $ws2
+bindcode $mod+12    workspace  $ws3
+bindcode $mod+13    workspace  $ws4
+bindcode $mod+14    workspace  $ws5
+bindcode $mod+15    workspace  $ws6
+bindcode $mod+16    workspace  $ws7
+bindcode $mod+17    workspace  $ws8
+bindcode $mod+18    workspace  $ws9
+bindcode $mod+19    workspace  $ws10
+
+# switch to workspace with numpad keys
+bindcode $mod+87 workspace $ws1 bindcode $mod+88 workspace $ws2
+bindcode $mod+89 workspace $ws3
+bindcode $mod+83 workspace $ws4
+bindcode $mod+84 workspace $ws5
+bindcode $mod+85 workspace $ws6
+bindcode $mod+79 workspace $ws7
+bindcode $mod+80 workspace $ws8
+bindcode $mod+81 workspace $ws9
+bindcode $mod+90 workspace $ws10
+
+# switch to workspace with numlock numpad keys
+bindcode $mod+Mod2+87 workspace $ws1
+bindcode $mod+Mod2+88 workspace $ws2
+bindcode $mod+Mod2+89 workspace $ws3
+bindcode $mod+Mod2+83 workspace $ws4
+bindcode $mod+Mod2+84 workspace $ws5
+bindcode $mod+Mod2+85 workspace $ws6
+bindcode $mod+Mod2+79 workspace $ws7
+bindcode $mod+Mod2+80 workspace $ws8
+bindcode $mod+Mod2+81 workspace $ws9
+bindcode $mod+Mod2+90 workspace $ws10
+
+# move focused container to workspace
+bindcode $mod+Shift+10    move container to workspace  $ws1
+bindcode $mod+Shift+11    move container to workspace  $ws2
+bindcode $mod+Shift+12    move container to workspace  $ws3
+bindcode $mod+Shift+13    move container to workspace  $ws4
+bindcode $mod+Shift+14    move container to workspace  $ws5
+bindcode $mod+Shift+15    move container to workspace  $ws6
+bindcode $mod+Shift+16    move container to workspace  $ws7
+bindcode $mod+Shift+17    move container to workspace  $ws8
+bindcode $mod+Shift+18    move container to workspace  $ws9
+bindcode $mod+Shift+19    move container to workspace  $ws10
+
+# move focused container to workspace with numpad keys
+bindcode $mod+Shift+Mod2+87 	move container to workspace  $ws1
+bindcode $mod+Shift+Mod2+88 	move container to workspace  $ws2
+bindcode $mod+Shift+Mod2+89 	move container to workspace  $ws3
+bindcode $mod+Shift+Mod2+83 	move container to workspace  $ws4
+bindcode $mod+Shift+Mod2+84 	move container to workspace  $ws5
+bindcode $mod+Shift+Mod2+85 	move container to workspace  $ws6
+bindcode $mod+Shift+Mod2+79 	move container to workspace  $ws7
+bindcode $mod+Shift+Mod2+80 	move container to workspace  $ws8
+bindcode $mod+Shift+Mod2+81 	move container to workspace  $ws9
+bindcode $mod+Shift+Mod2+90 	move container to workspace  $ws10
+
+# move focused container to workspace with numpad keys
+bindcode $mod+Shift+87 	 move container to workspace  $ws1
+bindcode $mod+Shift+88 	 move container to workspace  $ws2
+bindcode $mod+Shift+89 	 move container to workspace  $ws3
+bindcode $mod+Shift+83 	 move container to workspace  $ws4
+bindcode $mod+Shift+84 	 move container to workspace  $ws5
+bindcode $mod+Shift+85 	 move container to workspace  $ws6
+bindcode $mod+Shift+79 	 move container to workspace  $ws7
+bindcode $mod+Shift+80 	 move container to workspace  $ws8
+bindcode $mod+Shift+81 	 move container to workspace  $ws9
+bindcode $mod+Shift+90 	 move container to workspace  $ws10
+
+# resize window (you can also use the mouse for that):
+mode "" {
+        bindsym h resize shrink width 10 px or 10 ppt
+        bindsym j resize grow height 10 px or 10 ppt
+        bindsym k resize shrink height 10 px or 10 ppt
+        bindsym l resize grow width 10 px or 10 ppt
+
+ #same bindings, but for the arrow keys
+	bindsym Left resize shrink width 10 px or 10 ppt
+        bindsym Down resize grow height 10 px or 10 ppt
+        bindsym Up resize shrink height 10 px or 10 ppt
+        bindsym Right resize grow width 10 px or 10 ppt
+
+ #back to normal: Enter or Escape
+	bindsym $mod+r mode "default"
+	bindsym Return mode "default"
+        bindsym Escape mode "default"
+}
+
+bindsym $mod+r mode ""
+
+
+######################################
+
+# start a terminal
+bindsym $mod+Return exec --no-startup-id kitty 
+
+# kill focused window
+bindsym $mod+q kill
+
+# exit-menu
+bindsym $mod+Shift+e exec --no-startup-id ~/.config/i3/scripts/powermenu
+
+# Lock the system
+# lock with a picture:
+#bindsym $mod+l exec --no-startup-id i3lock -i  ~/.config/i3/i3-lock-screen.png -p default|win -t
+# lock by blurring the screen:
+bindsym F9 exec --no-startup-id ~/.config/i3/scripts/blur-lock
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+
+# restart i3 inplace (preserves your layout/session, can be used to update i3)
+bindsym $mod+Shift+r restart
+
+# keybinding in fancy rofi (automated):
+bindsym F1 exec --no-startup-id ~/.config/i3/scripts/keyhint-2
+# alternative
+# keybinding list in editor:
+# bindsym $mod+F1 exec --no-startup-id xed ~/.config/i3/keybindings
+
+# Backlight control
+#bindsym XF86MonBrightnessUp exec --no-startup-id xbacklight +10 && notify-send "Brightness - $(xbacklight -get | cut -d '.' -f 1)%"
+#bindsym XF86MonBrightnessDown exec --no-startup-id xbacklight -10 && notify-send "Brightness - $(xbacklight -get | cut -d '.' -f 1)%"
+# Backlight setting using dunst osc
+bindsym XF86MonBrightnessUp exec --no-startup-id ~/.config/i3/scripts/volume_brightness.sh brightness_up
+bindsym XF86MonBrightnessDown exec --no-startup-id ~/.config/i3/scripts/volume_brightness.sh brightness_down
+
+# change focus
+bindsym $mod+h focus left
+bindsym $mod+j focus down
+bindsym $mod+k focus up
+bindsym $mod+l focus right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Left focus left
+bindsym $mod+Down focus down
+bindsym $mod+Up focus up
+bindsym $mod+Right focus right
+
+# move focused window
+bindsym $mod+Shift+h move left
+bindsym $mod+Shift+j move down
+bindsym $mod+Shift+k move up
+bindsym $mod+Shift+l move right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Up move up
+bindsym $mod+Shift+Right move right
+
+# split in horizontal orientation
+bindsym $mod+BackSpace split toggle 
+
+# split in vertical orientation
+#bindsym $mod+v split v
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+# bindsym $mod+s layout stacking
+# bindsym $mod+g layout tabbed
+#bindsym $mod+e layout toggle split
+bindsym $mod+t layout toggle 
+
+
+# toggle tiling / floating
+bindsym $mod+Shift+f floating toggle
+
+# change focus between tiling / floating windows
+#bindsym $mod+space focus mode_toggle
+
+# focus the parent container
+#bindsym $mod+a focus parent
+
+# open new empty workspace
+bindsym $mod+Shift+n exec --no-startup-id ~/.config/i3/scripts/empty_workspace
+
+# Multimedia Keys
+
+# volume
+# use meta keys without showing osc
+#bindsym XF86AudioRaiseVolume exec --no-startup-id amixer -D pulse sset Master 5%+ && pkill -RTMIN+1 i3blocks
+#bindsym XF86AudioLowerVolume exec --no-startup-id amixer -D pulse sset Master 5%- && pkill -RTMIN+1 i3blocks
+# use meta keys showing osc using dunst
+bindsym XF86AudioRaiseVolume exec --no-startup-id ~/.config/i3/scripts/volume_brightness.sh volume_up
+bindsym XF86AudioLowerVolume exec --no-startup-id ~/.config/i3/scripts/volume_brightness.sh volume_down
+
+# gradular volume control
+bindsym $mod+XF86AudioRaiseVolume exec --no-startup-id amixer -D pulse sset Master 1%+ && pkill -RTMIN+1 i3blocks
+bindsym $mod+XF86AudioLowerVolume exec --no-startup-id amixer -D pulse sset Master 1%- && pkill -RTMIN+1 i3blocks
+
+# mute
+#bindsym XF86AudioMute exec --no-startup-id amixer sset Master toggle && killall -USR1 i3blocks
+# use meta keys showing osc using dunst
+bindsym XF86AudioMute exec --no-startup-id ~/.config/i3/scripts/volume_brightness.sh volume_mute
+
+# mic mute toggle
+bindsym XF86AudioMicMute exec amixer sset Capture toggle
+
+# audio control
+bindsym XF86AudioPlay exec --no-startup-id playerctl play
+bindsym XF86AudioPause exec --no-startup-id playerctl pause
+bindsym XF86AudioNext exec --no-startup-id playerctl next
+bindsym XF86AudioPrev exec --no-startup-id playerctl previous
+
+# Redirect sound to headphones
+#bindsym $mod+p exec --no-startup-id /usr/local/bin/switch-audio-port
+
+## App shortcuts
+bindsym $mod+w exec --no-startup-id /usr/bin/firefox
+bindsym $mod+n exec --no-startup-id rofi -config ~/.config/rofi/todo.rasi -modi Todo:~/.config/rofi/rofitodo.sh -show Todo
+bindsym Print exec --no-startup-id grim $HOME/Immagini/Schermate/$(date +"%Y-%m-%d-%T").png && notify-send "Screenshot saved to ~/$(date +"%Y-%m-%d-%T")-screenshot.png"
+bindsym --release Shift+Print exec --no-startup-id $HOME/.config/i3/scripts/miei/schermata.sh 
+bindsym $mod+Shift+p exec --no-startup-id ~/.config/i3/scripts/power-profiles
+
+##########################################
+# configuration for workspace behaviour: #
+##########################################
+
+# Define names for default workspaces for which we configure key bindings later on.
+# We use variables to avoid repeating the names in multiple places.
+set $ws1 1
+set $ws2 2
+set $ws3 3
+set $ws4 4
+set $ws5 5
+set $ws6 6
+set $ws7 7
+set $ws8 8
+set $ws9 9
+set $ws10 10
+
+# use workspaces on different displays:
+# where you have to replace VGA-0/HDMI-0 with the names for your displays
+# you can get from xrandr command
+# workspace $ws1 output HDMI-1
+# workspace $ws2 output HDMI-1
+# workspace $ws3 output HDMI-1
+# workspace $ws4 output HDMI-1
+# workspace $ws5 output HDMI-1
+# workspace $ws6 output DP-4
+# workspace $ws7 output DP-4
+# workspace $ws8 output DP-4
+# workspace $ws9 output DP-4
+# workspace $ws10 output DP-4
+
+# bind program to workspace and focus to them on startup:
+assign [class="discord"] $ws6
+assign [class="kitty"] $ws7
+assign [class="(?i)firefox"] $ws8
+
+# automatic set focus new window if it opens on another workspace than the current:
+#for_window [class=Xfce4-terminal] focus
+#for_window [class=(?i)firefox] focus
+#for_window [class=Thunar] focus
+#for_window [class=Thunderbird] focus
+#for_window [class=TelegramDesktop] focus
+
+exec --no-startup-id xset r rate 300 100
+exec_always --no-startup-id fcitx5
+##############
+# compositor #
+##############
+
+# transparency
+# uncomment one of them to be used
+# options could need changes, related to used GPU and drivers.
+# to find the right setting consult the archwiki or ask at the forum.
+#
+# xcompmgr: https://wiki.archlinux.org/title/Xcompmgr
+# manpage: https://man.archlinux.org/man/xcompmgr.1.en
+# install xcompmgr package to use it (yay -S xcompmgr)
+#exec --no-startup-id xcompmgr -C -n &
+# or an more specialized config like this:
+#exec --no-startup-id xcompmgr -c -C -t-5 -l-5 -r4.2 -o.55 &
+#
+# or:
+#
+# picom: https://wiki.archlinux.org/title/Picom
+# manpage: https://man.archlinux.org/man/picom.1.en
+# The default configuration is available in /etc/xdg/picom.conf 
+# For modifications, it can be copied to ~/.config/picom/picom.conf or ~/.config/picom.conf
+# install picom package (yay -S picom)
+# start using default config 
+#exec_always --no-startup-id picom -b
+#
+# for custom config:
+exec --no-startup-id picom --config  ~/.config/picom/picom.conf
+
+#############################################
+# autostart applications/services on login: #
+#############################################
+
+#get auth work with polkit-gnome
+exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
+
+# dex execute .desktop files + apps using /etc/xdg/autostart.
+# when second to i3 a DE is installed or mixed usage of i3 + xfce4 or GNOME
+# in this cases better disable dex and use manual starting apps using xdg/autostart
+# if enabled you should comment welcome app.
+# https://github.com/jceb/dex
+#exec --no-startup-id dex -a -s /etc/xdg/autostart/:~/.config/autostart/
+exec --no-startup-id dex --autostart --environment i3 
+#exec dbus-update-activation-environment --systemd DISPLAY WAYLAND_DISPLAY SWAYSOCK
+# start welcome app
+#exec --no-startup-id sh /usr/share/endeavouros/scripts/welcome --startdelay=3 
+
+# num lock activated
+#exec --no-startup-id numlockx on
+
+# configure multiple keyboard layouts and hotkey to switch (Alt+CAPSLOCK in this example)
+#exec --no-startup-id setxkbmap -layout 'us,sk' -variant altgr-intl,qwerty -option 'grp:alt_caps_toggle'
+
+# start conky:
+#exec_always --no-startup-id conky
+
+# start a script to setup displays
+# uncomment the next line, use arandr to setup displays and save the file as monitor:
+exec --no-startup-id ~/.screenlayout/monitor.sh
+# set wallpaper
+# exec --no-startup-id sleep 2 && nitrogen --restore
+exec_always --no-startup-id sleep 1 && feh --bg-fill $HOME/.config/sfondo.jpg
+
+# set powersavings for display:
+# exec --no-startup-id xset s 480 dpms 600 600 600
+exec --no-startup-id xset s off 
+
+# disable power saving (for example if using xscreensaver)
+exec --no-startup-id xset -dpms
+
+#blur enable
+#blur_xray enable
+#blur_passes 2
+#blur_radius 5
+
+# use xautolock to use autosuspend rules for mobile devices
+# https://wiki.archlinux.org/title/Session_lock#xautolock
+#exec --no-startup-id xautolock -time 60 -locker "systemctl suspend"
+
+
+# xscreensaver
+# https://www.jwz.org/xscreensaver
+#exec --no-startup-id xscreensaver --no-splash
+
+# Desktop notifications
+# dunst config used ~/.config/dunst/dunstrc
+# set alternative config if needed:
+#exec --no-startup-id /usr/bin/dunst --config ~/.config/dunst/dunstrc
+# may need to run dbus-launch explicitly: 
+#exec --no-startup-id dbus-launch /usr/bin/dunst
+exec --no-startup-id /usr/bin/dunst
+# alternative if you installed aside with XFCE4:
+# exec --no-startup-id /usr/lib/xfce4/notifyd/xfce4-notifyd &
+
+# autotiling script
+# https://github.com/nwg-piotr/autotiling
+# `yay -S autotiling ;) (it is in AUR)
+#exec_always --no-startup-id autotiling
+
+# Autostart apps as you like
+#exec --no-startup-id sleep 2 && xfce4-terminal
+#exec --no-startup-id sleep 7 && firefox https://github.com/endeavouros-team/endeavouros-i3wm-setup/blob/main/force-knowledge.md
+#exec --no-startup-id sleep 3 && thunar
+
+###############
+# system tray #
+###############
+# if you do not use dex: exec --no-startup-id dex --autostart --environment i3
+# you need to have tray apps started manually one by one:
+
+# start blueberry app for managing bluetooth devices from tray:
+#exec_always --no-startup-id blueberry-tray
+
+# networkmanager-applet
+#exec_always --no-startup-id nm-applet
+# clipman-applet
+#exec --no-startup-id xfce4-clipman
+
+##################
+# floating rules #
+##################
+
+# set floating (nontiling) for apps needing it
+
+for_window [class="Yad" instance="yad"] floating enable
+for_window [class="Galculator" instance="galculator"] floating enable
+for_window [class="Blueberry.py" instance="blueberry.py"] floating enable
+
+# set floating (nontiling) for special apps
+for_window [class="Xsane" instance="xsane"] floating enable
+for_window [class="Pavucontrol" instance="pavucontrol"] floating enable
+for_window [class="qt5ct" instance="qt5ct"] floating enable
+for_window [class="Blueberry.py" instance="blueberry.py"] floating enable
+for_window [class="Bluetooth-sendto" instance="bluetooth-sendto"] floating enable
+for_window [class="Pamac-manager"] floating enable
+for_window [window_role="About"] floating enable
+#for_window [title=".*"] opacity 1
+#for_window [title="^Startpage Search Results – Ablaze Floorp$"] opacity 0.9 
+
+
+
+
+
+exec_always --no-startup-id nm-applet --indicator 
+exec --no-startup-id blueman-applet 
+# set size of floating window
+#for_window [window_role="(?i)GtkFileChooserDialog"] resize set 640 480 #to set size of file choose dialog
+#for_window [class=".*"] resize set 640 480 #to change size of all floating windows 
+
+# set position of floating window
+#for_window [class=".*"] move position center
+
+######################################
+# color settings for bar and windows #
+######################################
+
+# Define colors variables:
+set $darkbluetrans 	#313244	
+set $darkblue		#b4befe 
+set $lightblue	        #eba0ac	
+#set $urgentred		#e53935
+
+set $urgentred		#f38ba8	
+set $white		#cdd6f4	
+set $black		#1e1e2e  	
+set $purple		#6870A1
+set $darkgrey		#383c4a
+set $grey		#b0b5bd
+set $mediumgrey		#8b8b8b
+set $yellowbrown	#e1b700
+
+# define colors for windows:
+#class		        	border		bground		text		indicator	child_border
+
+client.focused		    	$darkblue       $black          $white		$darkblue	$darkblue 
+client.unfocused	    	$purple	 	 $black   	$grey		$darkgrey		$darkgrey
+client.focused_inactive		$black   	$black  	$grey		$darkgrey		$darkgrey
+client.urgent		    	$urgentred	$urgentred	$white		$darkblue	$yellowbrown
+############################################
+# bar settings (input comes from i3blocks) #
+############################################
+
+# Start i3bar to display a workspace bar
+# (plus the system information i3status finds out, if available)
+bar {
+id bar-primary
+mode dock 
+		font pango: FiraCode Nerd Font medium 11.3
+                status_command i3blocks -c ~/.config/i3/i3blocks.conf
+	    	position top 
+#	    	i3bar_command i3bar --transparency
+# it could be that you have no primary display set: set one (xrandr --output <output> --primary)
+# reference: https://i3wm.org/docs/userguide.html#_tray_output
+#tray_output primary
+#tray_output none
+tray_output none
+# When strip_workspace_numbers is set to yes,
+# any workspace that has a name of the form
+# “[n][:][NAME]” will display only the name.
+strip_workspace_numbers yes
+##strip_workspace_name no
+
+		    colors {
+		    separator          $purple
+		  #  background         $darkgrey
+		    background	#1e1e2eD9
+		    statusline         $white
+#                          		border 		        bg		txt	
+		focused_workspace	#1e1e2eD9		#1e1e2eD9	#b4befe 	
+		active_workspace	#1e1e2eD9	      	#1e1e2eD9 	#a6adc8		
+		inactive_workspace	#1e1e2eD9 		#1e1e2eD9	#7f849c		
+		urgent_workspace	#1e1e2eD9    		#1e1e2eD9  	#a6e3a1  	
+
+	}
+}
+
+bar {
+id bar-tray
+mode invisible 
+		font pango: FiraCode Nerd Font medium 11.3
+                status_command i3blocks -c ~/.config/i3/i3blocks.conf
+	    	position top 
+#modifier none
+#	    	i3bar_command i3bar --transparency
+# it could be that you have no primary display set: set one (xrandr --output <output> --primary)
+# reference: https://i3wm.org/docs/userguide.html#_tray_output
+#tray_output primary
+
+# When strip_workspace_numbers is set to yes,
+# any workspace that has a name of the form
+# “[n][:][NAME]” will display only the name.
+strip_workspace_numbers yes
+##strip_workspace_name no
+
+		    colors {
+		    separator          $purple
+		  #  background         $darkgrey
+		    background	#1e1e2eD9 
+		    statusline         $white
+#                          		border 		        bg		txt		
+		focused_workspace	#1e1e2eD9	   	#1e1e2eD9 	#cdd6f4 	
+		active_workspace	#1e1e2eD9 	      	#1e1e2eD9 	#a6adc8		
+		inactive_workspace	#1e1e2eD9   		#1e1e2eD9	#7f849c		
+		urgent_workspace	#1e1e2eD9	    	#1e1e2eD9  	#a6e3a1  	
+	}
+}
+#bindsym $mod+p bar mode dock bar-tray; bar mode invisible bar-primary
+
+
+#####################################
+# Application menu handled by rofi: #
+#####################################
+
+## rofi bindings fancy application menu ($mod+d /F9 optional disabled)
+
+bindsym $mod+space exec --no-startup-id rofi -modi drun -show drun \
+		-config ~/.config/rofi/rofidmenu.rasi 
+
+#bindsym F9 exec --no-startup-id rofi -modi drun -show drun \
+#		-config ~/.config/rofi/rofidmenu.rasi
+
+## rofi bindings for window menu ($mod+t /F10 optional disabled)
+
+bindsym $mod+a exec --no-startup-id rofi -show window \
+		-config ~/.config/rofi/rofidmenu.rasi
+
+#bindsym F10 exec --no-startup-id rofi -show window \
+#		-config ~/.config/rofi/rofidmenu.rasi
+
+## rofi bindings to manage clipboard (install rofi-greenclip from the AUR)
+
+#exec --no-startup-id greenclip daemon>/dev/null
+#bindsym $mod+c exec --no-startup-id rofi -modi "clipboard:greenclip print" -show clipboard \
+#		-config ~/.config/rofi/rofidmenu.rasi
+
+bindsym $mod+s exec flameshot gui
diff --git a/dotfiles/i3/.config/i3/i3blocks.conf b/dotfiles/i3/.config/i3/i3blocks.conf
new file mode 100755
index 0000000..4403ad7
--- /dev/null
+++ b/dotfiles/i3/.config/i3/i3blocks.conf
@@ -0,0 +1,193 @@
+# File configurazione i3block
+
+
+separator=false
+markup=pango
+separator_block_width=6
+color=#cdd6f4
+
+
+
+[search]
+full_text= 󰍉
+color=#f38ba8
+command= rofi -modi drun -show drun -config ~/.config/rofi/rofidmenu.rasi
+
+#[files]
+#full_text= 
+#color=#cba6f7
+#command=i3-msg -q exec thunar ~/
+
+[todo]
+full_text=  
+color=#89b4fa
+command=rofi -config ~/.config/rofi/todo.rasi -modi Todo:~/.config/rofi/rofitodo.sh -show Todo
+
+[wallpaper]
+full_text=󰸉
+color=#fab387
+command=~/.config/i3/scripts/miei/wallpaper.sh
+
+[expander]
+full_text= 
+command=i3-msg -q "exec --no-startup-id ~/.config/i3/scripts/miei/active.sh"
+color=#b4befe
+
+[terminal]
+full_text= 
+color=#94e2d5
+command=i3-msg -q exec kitty
+
+
+[close]
+full_text= 󰅙 
+color=#f38ba8
+command=i3-msg -q kill 
+separator_block_width=0
+
+
+[simple-2]
+full_text=:
+color=#717171
+
+
+[meteo]
+command=~/.config/i3/scripts/miei/meteo.sh
+interval=1000
+
+[separator]
+full_text="⟨"
+color=#585b70
+
+#[update]
+#full_text=
+#command=~/.config/i3/scripts/miei/update.sh
+#interval=1800
+
+
+
+#[separator]
+#full_text="⟨"
+#color=#585b70
+
+[cpu_usage]
+full_text=
+label= 
+command=~/.config/i3/scripts/miei/cpu.sh
+interval=10
+
+#[separator]
+#full_text="⟨"
+#color=#585b70
+
+#[news]
+#full_text=""
+#command=~/.config/i3/scripts/miei/feed.sh
+#interval=once
+
+
+#[separator]
+#full_text="⟨"
+#color=#585b70
+
+#[pavucontrol]
+#full_text=
+#command=pavucontrol
+
+
+
+#[timer]
+#full_text=
+#command=~/.config/i3/scripts/miei/timer.sh
+#interval=1
+
+
+[separator]
+full_text="⟨"
+color=#585b70
+
+[pomodoro]
+command=~/.config/i3/scripts/pomodoro.sh
+interval=1
+
+[separator]
+full_text="⟨"
+color=#585b70
+
+# [gestione_energia]
+# full_text=
+# command=/home/flavio/.config/i3/scripts/miei/energia.sh
+# interval=once
+#
+#
+#
+# [separator]
+# full_text="⟨"
+# color=#585b70
+[volume-pulseaudio]
+command=~/.config/i3/scripts/volume
+instance=Master
+interval=1
+
+#[battery]
+#command=~/.config/i3/scripts/battery2
+#label=
+#interval=30
+
+#[separator]
+#full_text="|"
+
+#[separator]
+#full_text="|"
+#color=#585b70
+#[icona]
+#full_text=󰁹
+
+#[battery]
+#command=~/.config/i3/scripts/miei/power.sh
+#label=
+#interval=1
+
+
+
+
+[separator]
+full_text="⟨"
+color=#585b70
+
+[time]
+full_text=
+label=
+interval=1
+command=~/.config/i3/scripts/miei/ora.sh  
+separator_block_width=10
+color=#b4befe
+
+#color=#f38ba8
+
+[separator]
+full_text=" "
+separator_block_width=0
+background=#272836
+
+
+
+
+[shutdown_menu]
+full_text=<span size="medium"> ⏼  </span>
+#full_text=<span size="medium"> ⏼  </span>
+command=~/.config/i3/scripts/powermenu
+#color=#b4befe
+
+#color=#f5e0dc
+#background=#e71853
+background=#313244
+#separator_block_width=0
+#color=#f38ba8
+separator_block_width=0
+
+
+
+
+
+
diff --git a/dotfiles/i3/.config/i3/scripts/bell.wav b/dotfiles/i3/.config/i3/scripts/bell.wav
new file mode 100755
index 0000000..d2d34f1
Binary files /dev/null and b/dotfiles/i3/.config/i3/scripts/bell.wav differ
diff --git a/dotfiles/i3/.config/i3/scripts/bell_end.wav b/dotfiles/i3/.config/i3/scripts/bell_end.wav
new file mode 100755
index 0000000..7e3d6ad
Binary files /dev/null and b/dotfiles/i3/.config/i3/scripts/bell_end.wav differ
diff --git a/dotfiles/i3/.config/i3/scripts/blur-lock b/dotfiles/i3/.config/i3/scripts/blur-lock
new file mode 100755
index 0000000..4ff7ed6
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/blur-lock
@@ -0,0 +1,11 @@
+#!/usr/bin/env bash
+
+PICTURE=/tmp/i3lock.png
+SCREENSHOT="scrot -z $PICTURE"
+
+BLUR="5x4"
+
+$SCREENSHOT
+convert $PICTURE -blur $BLUR $PICTURE
+i3lock -i $PICTURE
+rm $PICTURE
diff --git a/dotfiles/i3/.config/i3/scripts/miei/active.sh b/dotfiles/i3/.config/i3/scripts/miei/active.sh
new file mode 100755
index 0000000..39f7763
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/miei/active.sh
@@ -0,0 +1,20 @@
+#!/usr/bin/bash
+if [ -f /tmp/tray ]; then
+	var=$(cat /tmp/tray)
+	if [ $var == 1 ]; then
+	echo 0 > /tmp/tray
+	i3-msg -q "bar mode dock bar-tray"
+	i3-msg -q "bar mode invisible bar-primary"	
+	fi
+   
+	if [ $var == 0 ]; then
+	echo 1 > /tmp/tray
+	i3-msg -q "bar mode invisible bar-tray"
+	i3-msg -q "bar mode dock bar-primary"	
+	
+	fi 
+else
+	echo 0 > /tmp/tray
+	i3-msg -q "bar mode dock bar-tray"
+	i3-msg -q "bar mode invisible bar-primary"	
+fi
diff --git a/dotfiles/i3/.config/i3/scripts/miei/cpu.sh b/dotfiles/i3/.config/i3/scripts/miei/cpu.sh
new file mode 100755
index 0000000..100d41b
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/miei/cpu.sh
@@ -0,0 +1,6 @@
+#!/usr/bin/bash
+if [ $BLOCK_BUTTON == 1 ]; then
+	kitty -e htop
+fi
+
+echo ""$[100-$(vmstat 1 2|tail -1|awk '{print $15}')]"%"
diff --git a/dotfiles/i3/.config/i3/scripts/miei/energia.sh b/dotfiles/i3/.config/i3/scripts/miei/energia.sh
new file mode 100755
index 0000000..c9e2a86
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/miei/energia.sh
@@ -0,0 +1,48 @@
+#!/usr/bin/bash
+file=/tmp/powerprofile
+
+if ! test -f $file; then
+echo 0 > $file
+powerprofilesctl set power-saver
+fi
+
+a=$(cat $file) 
+
+if [ $BLOCK_BUTTON == 1 ]
+then
+if [ $a == 0 ]
+then                                                                           
+echo 1 > $file
+echo "  Blc"
+powerprofilesctl set balanced 
+fi
+
+if [ $a == 1 ]
+then 
+echo 2 > $file
+echo "  Pro"
+powerprofilesctl set performance 
+fi
+
+if [ $a == 2 ]
+then 
+echo 0 > $file
+echo "  Eco"                                                                                     
+powerprofilesctl set power-saver 
+fi
+fi
+
+if [ $a == 1 ]; then                                                                                   
+echo "  Blc"
+fi                                                                                                     
+                                                                                                       
+if [ $a == 0 ]; then                                                                                   
+echo "  Eco"                                                                                     
+fi                                                                                                     
+   
+if [ $a == 2 ]; then                                                                                   
+echo "  Pro"
+fi                                                                            
+          
+
+
diff --git a/dotfiles/i3/.config/i3/scripts/miei/feed.sh b/dotfiles/i3/.config/i3/scripts/miei/feed.sh
new file mode 100755
index 0000000..772ff59
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/miei/feed.sh
@@ -0,0 +1,29 @@
+#!/usr/bin/bash
+a=0
+path=~/.config/i3/scripts/miei/feed.sh
+
+if [ $BLOCK_BUTTON == 1 ]
+then                                                                        
+if [ $a == 0 ]
+then                                                                           
+	sed -i '2d' $path                                         
+	sed -i '2ia=1' $path                                     
+	a=1
+else
+	sed -i '2d' $path                                        
+        sed -i '2ia=0' $path 
+	a=0
+fi     
+fi
+
+if [ $a == 1 ]
+then
+	echo  "  $(curl https://www.lescienze.it/news/ -s -L | grep -o href.*h2 | head -n 1 | grep -o -P '(?<=">).*(?=</a>)')" 
+else
+	echo "󰈙 News"
+fi
+
+if [ $BLOCK_BUTTON == 3 ]; then
+	xdg-open https://www.lescienze.it/news/
+fi
+
diff --git a/dotfiles/i3/.config/i3/scripts/miei/full_charge.sh b/dotfiles/i3/.config/i3/scripts/miei/full_charge.sh
new file mode 100755
index 0000000..fe0e95a
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/miei/full_charge.sh
@@ -0,0 +1,29 @@
+#!/usr/bin/bash
+
+# quando lo clicco mi ricarica il dispositivo fino al 100% e poi disabilita la feature
+path="/sys/devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/conservation_mode"
+value=$(cat $path)
+if [ $value -eq "" ];then
+	echo "only ideapad"
+fi
+
+level=$( upower -i /org/freedesktop/UPower/devices/battery_BAT1 | grep percentage | grep -o "[0-9]*")
+
+if [ $BLOCK_BUTTON -eq 1 ] && [ $value -eq "1" ];then
+	echo "󱟡 full"
+	echo $PASSW | sudo -S sh -c "echo 0 > $path"
+fi
+
+
+if [ $level -ge "95" ] && [ $value -eq "0" ];then
+	echo "󱈑 Csv"
+	echo $PASSW | sudo -S sh -c "echo 1 > $path"
+fi
+
+if [ $value -eq 0 ];then
+	echo "󱟡 full"
+else
+	echo "󱈑 Csv"
+fi
+
+
diff --git a/dotfiles/i3/.config/i3/scripts/miei/meteo.sh b/dotfiles/i3/.config/i3/scripts/miei/meteo.sh
new file mode 100755
index 0000000..a5563b7
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/miei/meteo.sh
@@ -0,0 +1,9 @@
+#!/usr/bin/bash
+meteo=$(curl wttr.in/Toronto?format=1 | xargs echo)
+first="${meteo%% *}"
+if [ "$meteo" == "" ] || [ "$first" == "Unknown" ]; then
+  echo "  Off"
+
+else
+  echo $meteo
+fi
diff --git a/dotfiles/i3/.config/i3/scripts/miei/ora.sh b/dotfiles/i3/.config/i3/scripts/miei/ora.sh
new file mode 100755
index 0000000..397baad
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/miei/ora.sh
@@ -0,0 +1,33 @@
+#!/usr/bin/bash
+a=0
+
+path=~/.config/i3/scripts/miei/ora.sh
+
+cambia_var () {
+if [ $a == 0 ]; then
+	sed -i '2d' $path 
+	sed -i '2ia=1' $path
+	# se non mostri la variabile subito ci sarà il delay di interval
+	a=1 
+	return 1
+fi
+if [ $a == 1 ]; then
+        sed -i '2d' $path
+	sed -i '2ia=0' $path
+        a=0
+	return 0
+fi
+}
+
+if [ $BLOCK_BUTTON == 1 ]; then
+	cambia_var
+fi
+
+if [ $a == 0 ]; then
+	date '+%a %d %b %H:%M' 
+fi
+
+if [ $a == 1 ]; then
+	date '+%H:%M'                                                                              
+fi
+
diff --git a/dotfiles/i3/.config/i3/scripts/miei/power.sh b/dotfiles/i3/.config/i3/scripts/miei/power.sh
new file mode 100755
index 0000000..7d7902d
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/miei/power.sh
@@ -0,0 +1,52 @@
+#!/usr/bin/bash
+#echo " 󰣐 󰣐 󰣐 󰣐 󰋔 "
+#echo ""
+#echo "#a6e3a1"
+#
+
+if [ $(cat /sys/class/power_supply/ACAD/online) == 1 ];then
+~/.config/i3/scripts/miei/power_charge.sh
+exit 1
+fi
+
+level=$( upower -i /org/freedesktop/UPower/devices/battery_BAT1 | grep percentage | grep -o "[0-9]*")
+
+unit=20
+vite=$(($level/unit))
+
+if [ $vite == 5 ]; then
+	echo ""
+	echo ""
+	echo "#cdd6f4"
+fi
+
+if [ $vite == 4 ]; then
+	echo ""
+	echo ""
+	echo "#a6e3a1"
+fi
+if [ $vite == 3 ]; then
+	echo ""
+	echo ""
+	echo "#a6e3a1"
+fi
+if [ $vite == 2 ]; then
+	echo ""
+	echo ""
+	echo "#fab387"
+fi
+if [ $vite == 1 ]; then
+	echo ""
+	echo ""
+	echo "#fab387"
+fi
+if [ "$level" -lt "20" ] && [ "$level" -ge "10" ]; then
+	echo ""
+	echo ""
+	echo "#f38ba8"
+fi
+if [ "$level" -lt "10" ]; then
+	echo "!"
+	echo ""
+	echo "#f38ba8"
+fi
diff --git a/dotfiles/i3/.config/i3/scripts/miei/power_charge.sh b/dotfiles/i3/.config/i3/scripts/miei/power_charge.sh
new file mode 100755
index 0000000..9a75b80
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/miei/power_charge.sh
@@ -0,0 +1,47 @@
+#!/usr/bin/bash
+#echo " 󰣐 󰣐 󰣐 󰣐 󰋔 "
+#echo ""
+#echo "#a6e3a1"
+#  󰁹󱐋
+
+level=$( upower -i /org/freedesktop/UPower/devices/battery_BAT1 | grep percentage | grep -o "[0-9]*")
+
+unit=20
+vite=$(($level/unit))
+
+if [ $vite == 5 ]; then
+	echo "󱐋 "
+	echo ""
+	echo "#cdd6f4"
+fi
+
+if [ $vite == 4 ]; then
+	echo "󱐋 "
+	echo ""
+	echo "#a6e3a1"
+fi
+if [ $vite == 3 ]; then
+	echo "󱐋 "
+	echo ""
+	echo "#a6e3a1"
+fi
+if [ $vite == 2 ]; then
+	echo "󱐋 "
+	echo ""
+	echo "#fab387"
+fi
+if [ $vite == 1 ]; then
+	echo "󱐋 "
+	echo ""
+	echo "#fab387"
+fi
+if [ "$level" -lt "20" ] && [ "$level" -ge "10" ]; then
+	echo "󱐋 "
+	echo ""
+	echo "#f38ba8"
+fi
+if [ "$level" -lt "10" ]; then
+	echo "󱐋 !"
+	echo ""
+	echo "#f38ba8"
+fi
diff --git a/dotfiles/i3/.config/i3/scripts/miei/schermata.sh b/dotfiles/i3/.config/i3/scripts/miei/schermata.sh
new file mode 100755
index 0000000..a2da424
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/miei/schermata.sh
@@ -0,0 +1,10 @@
+#!/usr/bin/bash
+a=$(date +"%Y-%m-%d-%T")-schermata.png
+
+maim --select ~/Immagini/Schermate/$a
+notify-send "Screenshot saved to ~/$a"
+#kdialog --yesno "Screenshot salvato, vuoi aprirlo?"
+#if [ $? == 0 ]; then
+  eog ~/Immagini/Schermate/$a
+#fi
+
diff --git a/dotfiles/i3/.config/i3/scripts/miei/timer.sh b/dotfiles/i3/.config/i3/scripts/miei/timer.sh
new file mode 100755
index 0000000..9ba8b77
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/miei/timer.sh
@@ -0,0 +1,80 @@
+#!/usr/bin/bash
+#creazione meccanismo di cambiamento timer modalità m (modifica)
+path=/tmp/miotimer
+
+modifica () {
+if [ $BLOCK_BUTTON == 4 ];then
+	current=$((current + 1))
+	echo $mode > $path
+	echo $current >> $path
+fi
+if [ $BLOCK_BUTTON == 5 ] && [ $current != 0 ];then
+	current=$((current - 1))
+	echo $mode > $path
+	echo $current >> $path
+fi
+if [ $current == 0 ];then
+       echo "󰔛 Tmr"
+else
+echo " $(sed '2!d' $path) m"
+echo ""
+echo "#f9e2af"
+fi       
+}
+
+timer () {
+start=$(sed '2!d' $path)
+start=$((start * 60))
+now=$(date +%s)
+first=$(sed '3!d' $path)
+manca=$((start-now+first))
+if [ $manca != 0 ];then
+	echo "󰄉 $((manca / 60)):$((manca % 60))"
+	echo ""
+	echo "#a6e3a1"
+
+else
+	echo "󰔛 Tmr"
+	notify-send "Timer is over"
+	rm $path
+fi
+}
+
+
+
+
+if [ -f $path ]
+then
+
+
+	mode=$(sed '1!d' $path)
+	current=$(sed '2!d' $path)
+
+	if [ $BLOCK_BUTTON == 1 ] && [ $current != 0 ];then
+	if [ $mode == "w" ];then
+	rm $path	
+	echo "󰔛 Tmr" 	
+	exit	
+	fi	
+	mode=w	
+	echo $mode > $path
+	echo $current >> $path
+	echo $(date +%s) >> $path		
+	fi
+
+
+	if [ $mode == "m" ];then
+	modifica
+	fi
+
+	if [ $mode == "w" ];then
+	timer	
+	fi
+
+
+
+else
+echo m > $path 
+echo 0 >> $path 
+echo "󰔛 Tmr" 
+fi
diff --git a/dotfiles/i3/.config/i3/scripts/miei/update.sh b/dotfiles/i3/.config/i3/scripts/miei/update.sh
new file mode 100755
index 0000000..2d372b2
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/miei/update.sh
@@ -0,0 +1,16 @@
+#!/usr/bin/bash
+
+if [ $BLOCK_BUTTON -eq "1" ];then
+	kitty -e sudo dnf upgrade  
+	kitty -e flatpak update
+fi
+
+
+numero=$(dnf check-update| grep -Ec ' updates$')
+if [ $numero -eq "0" ];then
+echo " "
+else
+echo "󰏕 $numero"
+echo ""
+echo "#f9e2af"
+fi
diff --git a/dotfiles/i3/.config/i3/scripts/miei/volcolor.sh b/dotfiles/i3/.config/i3/scripts/miei/volcolor.sh
new file mode 100755
index 0000000..d807dc6
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/miei/volcolor.sh
@@ -0,0 +1,78 @@
+#!/bin/bash
+
+level=$(pactl get-sink-volume @DEFAULT_SINK@ | grep -Po '[0-9]{1,3}(?=%)' | head -1 )
+
+unit=10
+vite=$(($level/unit))
+mute=$(pactl get-sink-mute @DEFAULT_SINK@)
+
+if [ "$mute" == "Mute: sì" ] || [ "$mute" == "Mute: yes" ]; then
+	echo " "
+	echo ""
+	echo "#cdd6f4"
+else
+if [ $vite == 10 ]; then
+	echo " "
+	echo ""
+	echo "#f38ba8"
+fi
+
+if [ $vite == 9 ]; then
+	echo " "
+	echo ""
+	echo "#f38ba8"
+fi
+if [ $vite == 8 ]; then
+	echo " "
+	echo ""
+	echo "#f38ba8"
+fi
+if [ $vite == 7 ]; then
+	echo " "
+	echo ""
+	echo "#f38ba8"
+fi
+if [ $vite == 6 ]; then
+	echo " "
+	echo ""
+	echo "#fab387"
+fi
+if [ $vite == 5 ]; then
+	echo " "
+	echo ""
+	echo "#fab387"
+fi
+if [ $vite == 4 ]; then
+	echo " "
+	echo ""
+	echo "#a6e3a1"
+fi
+if [ $vite == 3 ]; then
+	echo " "
+	echo ""
+	echo "#a6e3a1"
+fi
+if [ $vite == 2 ]; then
+	echo " "
+	echo ""
+	echo "#a6e3a1"
+fi
+if [ $vite == 1 ]; then
+	echo " "
+	echo ""
+	echo "#a6e3a1"
+fi
+if [ $vite == 0 ] && [ $level != 0 ]; then
+	echo " "
+	echo ""
+	echo "#a6e3a1"
+fi
+if [ $vite == 0 ] && [ $level == 0 ]; then
+	echo " "
+	echo ""
+	echo "#cdd6f4"
+fi
+
+
+fi
+
diff --git a/dotfiles/i3/.config/i3/scripts/miei/wallpaper.sh b/dotfiles/i3/.config/i3/scripts/miei/wallpaper.sh
new file mode 100755
index 0000000..509caa3
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/miei/wallpaper.sh
@@ -0,0 +1,26 @@
+#!/usr/bin/bash
+w_path=~/.config/wallpaper/
+c_path=~/.config/wallpaper/current
+config=~/.config/
+current=$(cat $c_path)
+
+if [ $BLOCK_BUTTON == 1 ];then
+new=$((current+1))
+if [ $new == 13 ]; then
+	new=0
+fi
+fi
+
+if [ $BLOCK_BUTTON == 3 ];then
+new=$((current - 1))
+if [ $new == "-1" ]; then
+	new=12
+fi
+fi
+
+rm "${config}sfondo.jpg"
+cp "$w_path$new.jpg" $config
+mv "$config$new.jpg" "${config}sfondo.jpg"
+sed -i '1d' $c_path 
+echo $new >> $c_path
+feh --bg-fill ~/.config/sfondo.jpg
diff --git a/dotfiles/i3/.config/i3/scripts/pomodoro.sh b/dotfiles/i3/.config/i3/scripts/pomodoro.sh
new file mode 100755
index 0000000..e2a0cc3
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/pomodoro.sh
@@ -0,0 +1,132 @@
+#!/bin/bash
+if [ -f /tmp/pomo_timer ];then
+	pluto=$(cat /tmp/pomo_timer)
+
+case $BLOCK_BUTTON in
+	3)   if [ $pluto -eq "0" ];then
+	     echo "1" > /tmp/pomo_timer 
+	     pluto=1 
+	     else
+	     echo "0" > /tmp/pomo_timer 
+	     pluto=0 
+	     fi	
+		
+		;;
+esac
+
+	
+	
+if [ $pluto -eq "0" ];then
+
+# Config variables
+# 40min = 2400s
+# 25min = 1500s
+# 20min = 1200s
+# 5min = 300s
+
+# In secondi
+work_time=2400
+break_time=1200
+
+msg_start=" Pom"
+work_prefix=" "
+break_prefix="󰅶 "
+
+#start_color="#b39df3"
+#start_color="#E06C75"
+start_color="#cdd6f4"
+
+break_color="#a6e3a1"
+work_color="#f38ba8"
+
+break_command="notify-send -t 2500 'Grab a tea'"
+work_command="notify-send -t 2500 'Time to work!'"
+
+pom_path="/tmp/pomodoro"
+
+function display () {
+	min=$((s/60))
+	sek=$((s%60))
+	if [ $min -eq 0 ]
+	then
+		min=00
+	elif [ $min -lt 10 ]
+	then
+		min=0$min
+	fi
+	if [ $sek -lt 10 ]
+	then
+		sek=0$sek
+	fi
+	case $2 in # richiamo alla seconda variabile, t
+		w)
+			echo "$work_prefix$min:$sek"
+			echo $min:$sek
+			echo $work_color
+		;;
+		b)
+			echo "$break_prefix$min:$sek"
+			echo $min:$sek
+			echo $break_color
+		;;
+	esac
+}
+
+if [ -f "$pom_path" ] && [ "$(wc -l $pom_path | awk '{print $1}')" -eq 2 ]
+then
+	p=$(sed '1 d' $pom_path) # time 
+	t=$(sed '2 d' $pom_path) # mode 
+	case $t in
+		w) dur=$work_time;;
+		b) dur=$break_time;;
+	esac 
+	now=$(date +%s)
+	s=$((dur-now+p)) # sec mancanti basandosi su orologio e istante chiamata questa fzione 
+	if [ $s -le 0 ] # if time less than 0 then switch mode
+	then
+		case $t in
+			w)
+				echo b > $pom_path
+				eval "$break_command"
+				paplay $HOME/.config/i3/scripts/bell.wav	
+			;;
+			b)
+				echo w > $pom_path
+				eval "$work_command"
+				paplay $HOME/.config/i3/scripts/bell_end.wav	
+	
+			;;
+		esac
+		echo "$now" >> $pom_path
+	fi
+	display "$s" "$t"
+else
+	echo "$msg_start"
+	echo "$msg_start"
+	echo "$start_color"
+fi
+
+case $BLOCK_BUTTON in
+	1)
+		if [ -f $pom_path ]; then # if file exists then stop reset timer
+			rm $pom_path
+		else
+			echo w > $pom_path # else start timer
+			date +%s >> $pom_path
+		fi
+	;;
+esac
+# è scritto in modo carino ma non ha sostanziali differenze rispetto al mio , per aggiornarsi sfrutta l'interval integrato. Inoltre è vincolato dalla stampa dell'orario effettivo che non gli permette di andare fuori dal taiming e rimanere sempre in orario. Dovrei evitare la funzione di chiamata e quella di sleep ed optare per un intervallo dentro il blocco. L'aggiornamento nel primo caso non cambia nulla nel secondo mostra secondi differenti ma si può fare.
+
+fi
+
+
+if [ $pluto -eq "1" ];then
+~/.config/i3/scripts/miei/timer.sh
+fi
+
+else
+	echo "0" > /tmp/pomo_timer
+fi
+
+
diff --git a/dotfiles/i3/.config/i3/scripts/powermenu b/dotfiles/i3/.config/i3/scripts/powermenu
new file mode 100755
index 0000000..1e61086
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/powermenu
@@ -0,0 +1,184 @@
+#!/usr/bin/env bash
+#
+# Use rofi/zenity to change system runstate thanks to systemd.
+#
+# Note: this currently relies on associative array support in the shell.
+#
+# Inspired from i3pystatus wiki:
+# https://github.com/enkore/i3pystatus/wiki/Shutdown-Menu
+#
+# Copyright 2015 Benjamin Chrétien <chretien at lirmm dot fr>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# modified to work with latest rofi update by joekamprad <joekamprad@endeavouros.com>
+
+#######################################################################
+#                            BEGIN CONFIG                             #
+#######################################################################
+
+# Use a custom lock script
+#LOCKSCRIPT="i3lock-extra -m pixelize"
+
+# Colors: FG (foreground), BG (background), HL (highlighted)
+FG_COLOR="#bbbbbb"
+BG_COLOR="#111111"
+HLFG_COLOR="#111111"
+HLBG_COLOR="#bbbbbb"
+BORDER_COLOR="#222222"
+
+# Options not related to colors (most rofi options do not work anymore)
+ROFI_OPTIONS=(-theme ~/.config/rofi/pw.rasi)
+# Zenity options
+ZENITY_TITLE="Power Menu"
+ZENITY_TEXT="Action:"
+ZENITY_OPTIONS=(--column= --hide-header)
+
+#######################################################################
+#                             END CONFIG                              #
+#######################################################################
+
+# Whether to ask for user's confirmation
+enable_confirmation=false
+
+# Preferred launcher if both are available
+preferred_launcher="rofi"
+
+usage="$(basename "$0") [-h] [-c] [-p name] -- display a menu for shutdown, reboot, lock etc.
+
+where:
+    -h  show this help text
+    -c  ask for user confirmation
+    -p  preferred launcher (rofi or zenity)
+
+This script depends on:
+  - systemd,
+  - i3,
+  - rofi or zenity."
+
+# Check whether the user-defined launcher is valid
+launcher_list=(rofi zenity)
+function check_launcher() {
+  if [[ ! "${launcher_list[@]}" =~ (^|[[:space:]])"$1"($|[[:space:]]) ]]; then
+    echo "Supported launchers: ${launcher_list[*]}"
+    exit 1
+  else
+    # Get array with unique elements and preferred launcher first
+    # Note: uniq expects a sorted list, so we cannot use it
+    i=1
+    launcher_list=($(for l in "$1" "${launcher_list[@]}"; do printf "%i %s\n" "$i" "$l"; let i+=1; done \
+      | sort -uk2 | sort -nk1 | cut -d' ' -f2- | tr '\n' ' '))
+  fi
+}
+
+# Parse CLI arguments
+while getopts "hcp:" option; do
+  case "${option}" in
+    h) echo "${usage}"
+       exit 0
+       ;;
+    c) enable_confirmation=true
+       ;;
+    p) preferred_launcher="${OPTARG}"
+       check_launcher "${preferred_launcher}"
+       ;;
+    *) exit 1
+       ;;
+  esac
+done
+
+# Check whether a command exists
+function command_exists() {
+  command -v "$1" &> /dev/null 2>&1
+}
+
+# systemctl required
+if ! command_exists systemctl ; then
+  exit 1
+fi
+
+# menu defined as an associative array
+typeset -A menu
+
+# Menu with keys/commands
+
+menu=(
+  [  Shutdown]="systemctl poweroff"
+  [   Reboot]="systemctl reboot"
+  [   Suspend]="systemctl suspend"
+  [  Lock]="~/.config/i3/scripts/blur-lock"
+  [  Logout]="i3-msg exit"
+)
+
+menu_nrows=${#menu[@]}
+
+# Menu entries that may trigger a confirmation message
+menu_confirm="Shutdown Reboot Hibernate Suspend Halt Logout"
+
+launcher_exe=""
+launcher_options=""
+rofi_colors=""
+
+function prepare_launcher() {
+  if [[ "$1" == "rofi" ]]; then
+    rofi_colors=(-bc "${BORDER_COLOR}" -bg "${BG_COLOR}" -fg "${FG_COLOR}" \
+        -hlfg "${HLFG_COLOR}" -hlbg "${HLBG_COLOR}")
+    launcher_exe="rofi"
+    launcher_options=(-dmenu -i -lines "${menu_nrows}" -p "${ROFI_TEXT}" \
+        "${rofi_colors}" "${ROFI_OPTIONS[@]}")
+  elif [[ "$1" == "zenity" ]]; then
+    launcher_exe="zenity"
+    launcher_options=(--list --title="${ZENITY_TITLE}" --text="${ZENITY_TEXT}" \
+        "${ZENITY_OPTIONS[@]}")
+  fi
+}
+
+for l in "${launcher_list[@]}"; do
+  if command_exists "${l}" ; then
+    prepare_launcher "${l}"
+    break
+  fi
+done
+
+# No launcher available
+if [[ -z "${launcher_exe}" ]]; then
+  exit 1
+fi
+
+launcher=(${launcher_exe} "${launcher_options[@]}")
+selection="$(printf '%s\n' "${!menu[@]}" | sort | "${launcher[@]}")"
+
+function ask_confirmation() {
+  if [ "${launcher_exe}" == "rofi" ]; then
+    confirmed=$(echo -e "Yes\nNo" | rofi -dmenu -i -lines 2 -p "${selection}?" \
+      "${rofi_colors}" "${ROFI_OPTIONS[@]}")
+    [ "${confirmed}" == "Yes" ] && confirmed=0
+  elif [ "${launcher_exe}" == "zenity" ]; then
+    zenity --question --text "Are you sure you want to ${selection,,}?"
+    confirmed=$?
+  fi
+
+  if [ "${confirmed}" == 0 ]; then
+    i3-msg -q "exec --no-startup-id ${menu[${selection}]}"
+  fi
+}
+
+if [[ $? -eq 0 && ! -z ${selection} ]]; then
+  if [[ "${enable_confirmation}" = true && \
+        ${menu_confirm} =~ (^|[[:space:]])"${selection}"($|[[:space:]]) ]]; then
+    ask_confirmation
+  else
+    i3-msg -q "exec --no-startup-id ${menu[${selection}]}"
+  fi
+fi
diff --git a/dotfiles/i3/.config/i3/scripts/volume b/dotfiles/i3/.config/i3/scripts/volume
new file mode 100755
index 0000000..05539d4
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/volume
@@ -0,0 +1,97 @@
+#!/usr/bin/env bash
+# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
+# Copyright (C) 2014 Alexander Keller <github@nycroth.com>
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# original source: https://github.com/vivien/i3blocks-contrib/tree/master/volume
+# check the readme: https://github.com/vivien/i3blocks-contrib/blob/master/volume/README.md
+#------------------------------------------------------------------------
+
+# The second parameter overrides the mixer selection
+# For PulseAudio users, eventually use "pulse"
+# For Jack/Jack2 users, use "jackplug"
+# For ALSA users, you may use "default" for your primary card
+# or you may use hw:# where # is the number of the card desired
+if [[ -z "$MIXER" ]] ; then
+    MIXER="default"
+    if command -v pulseaudio >/dev/null 2>&1 && pulseaudio --check ; then
+        # pulseaudio is running, but not all installations use "pulse"
+        if amixer -D pulse info >/dev/null 2>&1 ; then
+            MIXER="pulse"
+        fi
+    fi
+    [ -n "$(lsmod | grep jack)" ] && MIXER="jackplug"
+    MIXER="${2:-$MIXER}"
+fi
+
+# The instance option sets the control to report and configure
+# This defaults to the first control of your selected mixer
+# For a list of the available, use `amixer -D $Your_Mixer scontrols`
+if [[ -z "$SCONTROL" ]] ; then
+    SCONTROL="${BLOCK_INSTANCE:-$(amixer -D $MIXER scontrols |
+                      sed -n "s/Simple mixer control '\([^']*\)',0/\1/p" |
+                      head -n1
+                    )}"
+fi
+
+# The first parameter sets the step to change the volume by (and units to display)
+# This may be in in % or dB (eg. 5% or 3dB)
+if [[ -z "$STEP" ]] ; then
+    STEP="${1:-5%}"
+fi
+
+# AMIXER(1):
+# "Use the mapped volume for evaluating the percentage representation like alsamixer, to be
+# more natural for human ear."
+NATURAL_MAPPING=${NATURAL_MAPPING:-0}
+if [[ "$NATURAL_MAPPING" != "0" ]] ; then
+    AMIXER_PARAMS="-M"
+fi
+
+#------------------------------------------------------------------------
+
+capability() { # Return "Capture" if the device is a capture device
+  amixer $AMIXER_PARAMS -D $MIXER get $SCONTROL |
+    sed -n "s/  Capabilities:.*cvolume.*/Capture/p"
+}
+
+volume() {
+  amixer $AMIXER_PARAMS -D $MIXER get $SCONTROL $(capability)
+}
+
+format() {
+  
+  perl_filter='if (/.*\[(\d+%)\] (\[(-?\d+.\d+dB)\] )?\[(on|off)\]/)'
+  perl_filter+='{CORE::say $4 eq "off" ? "0%" : "'
+  # If dB was selected, print that instead
+  perl_filter+=$([[ $STEP = *dB ]] && echo '$3' || echo '$1')
+  perl_filter+='"; exit}'
+#  output=$(/home/flavio/.config/i3/scripts/miei/volcolor.sh) 
+#  valore=${output::-1}
+# basandomi sul valore di output cambio icona
+~/.config/i3/scripts/miei/volcolor.sh
+}
+
+#------------------------------------------------------------------------
+
+case $BLOCK_BUTTON in
+  1) amixer $AMIXER_PARAMS -q -D $MIXER sset $SCONTROL $(capability) toggle ;;  # right click, mute/unmute
+  3) pavucontrol;;
+
+  4) amixer $AMIXER_PARAMS -q -D $MIXER sset $SCONTROL $(capability) ${STEP}+ unmute ;; # scroll up, increase
+  5) amixer $AMIXER_PARAMS -q -D $MIXER sset $SCONTROL $(capability) ${STEP}- unmute ;; # scroll down, decrease
+esac
+
+volume | format
diff --git a/dotfiles/i3/.config/i3/scripts/volume_brightness.sh b/dotfiles/i3/.config/i3/scripts/volume_brightness.sh
new file mode 100755
index 0000000..ed6ed93
--- /dev/null
+++ b/dotfiles/i3/.config/i3/scripts/volume_brightness.sh
@@ -0,0 +1,98 @@
+#!/bin/bash
+# original source: https://gitlab.com/Nmoleo/i3-volume-brightness-indicator
+
+# taken from here: https://gitlab.com/Nmoleo/i3-volume-brightness-indicator
+
+# See README.md for usage instructions
+bar_color="#a6da95"
+volume_step=5
+brightness_step=5%
+max_volume=100
+
+# Uses regex to get volume from pactl
+function get_volume {
+    pactl get-sink-volume @DEFAULT_SINK@ | grep -Po '[0-9]{1,3}(?=%)' | head -1
+}
+
+# Uses regex to get mute status from pactl
+function get_mute {
+    pactl get-sink-mute @DEFAULT_SINK@ | grep -Po '(?<=Mute: )(yes|no)'
+}
+
+# Uses regex to get brightness from xbacklight
+function get_brightness {
+    brightnessctl g | grep -Po '[0-9]{1,3}' | head -n 1
+
+}
+
+# Returns a mute icon, a volume-low icon, or a volume-high icon, depending on the volume
+function get_volume_icon {
+    volume=$(get_volume)
+    mute=$(get_mute)
+    if [ "$volume" -eq 0 ] || [ "$mute" == "yes" ] ; then
+        volume_icon="󰸈  "
+    elif [ "$volume" -lt 50 ]; then
+        volume_icon="󰕾  "
+    else
+        volume_icon="  "
+    fi
+}
+
+# Always returns the same icon - I couldn't get the brightness-low icon to work with fontawesome
+function get_brightness_icon {
+    brightness_icon="  "
+}
+
+# Displays a volume notification using dunstify
+function show_volume_notif {
+    volume=$(get_mute)
+    get_volume_icon
+    dunstify -t 1000 -r 2593 -u normal "$volume_icon $volume%" -h int:value:$volume -h string:hlcolor:$bar_color
+}
+
+# Displays a brightness notification using dunstify
+function show_brightness_notif {
+	massima=$(brightnessctl m)
+	brightness=$(($(get_brightness)*100/$massima))
+    get_brightness_icon
+    dunstify -t 1000 -r 2593 -u normal "$brightness_icon $brightness%" -h int:value:$brightness -h string:hlcolor:$bar_color
+}
+
+# Main function - Takes user input, "volume_up", "volume_down", "brightness_up", or "brightness_down"
+case $1 in
+    volume_up)
+    # Unmutes and increases volume, then displays the notification
+    pactl set-sink-mute @DEFAULT_SINK@ 0
+    volume=$(get_volume)
+    if [ $(( "$volume" + "$volume_step" )) -gt $max_volume ]; then
+        pactl set-sink-volume @DEFAULT_SINK@ $max_volume%
+    else
+        pactl set-sink-volume @DEFAULT_SINK@ +$volume_step%
+    fi
+    show_volume_notif
+    ;;
+
+    volume_down)
+    # Raises volume and displays the notification
+    pactl set-sink-volume @DEFAULT_SINK@ -$volume_step%
+    show_volume_notif
+    ;;
+
+    volume_mute)
+    # Toggles mute and displays the notification
+    pactl set-sink-mute @DEFAULT_SINK@ toggle
+    show_volume_notif
+    ;;
+
+    brightness_up)
+    # Increases brightness and displays the notification
+    brightnessctl s +$brightness_step  
+    show_brightness_notif
+    ;;
+
+    brightness_down)
+    # Decreases brightness and displays the notification
+    brightnessctl s  $brightness_step- 
+    show_brightness_notif
+    ;;
+esac
diff --git a/dotfiles/kmonad/.kmonad/real-programmers-dvorak.kbd b/dotfiles/kmonad/.kmonad/real-programmers-dvorak.kbd
new file mode 100644
index 0000000..473987b
--- /dev/null
+++ b/dotfiles/kmonad/.kmonad/real-programmers-dvorak.kbd
@@ -0,0 +1,61 @@
+
+(defcfg
+  ;; For Linux
+  input  (device-file "/dev/input/by-path/pci-0000:02:00.0-usb-0:5:1.0-event-kbd")
+  output (uinput-sink "My KMonad output"
+    ;; To understand the importance of the following line, see the section on
+    ;; Compose-key sequences at the near-bottom of this file.
+    "/run/current-system/sw/bin/sleep 1 && /run/current-system/sw/bin/setxkbmap -option compose:ralt")
+  cmp-seq ralt    ;; Set the compose key to `RightAlt'
+  cmp-seq-delay 5 ;; 5ms delay between each compose-key sequence press
+
+  ;; For Windows
+  ;; input  (low-level-hook)
+  ;; output (send-event-sink)
+
+  ;; For MacOS
+  ;; input  (iokit-name "my-keyboard-product-string")
+  ;; output (kext)
+
+  ;; Comment this if you want unhandled events not to be emitted
+  fallthrough true
+
+  ;; Set this to false to disable any command-execution in KMonad
+  allow-cmd true
+
+  ;; Set the implicit around to `around`
+  implicit-around around
+)
+
+(defsrc
+  esc  f1   f2   f3   f4   f5   f6   f7   f8   f9   f10  f11  f12      
+  grv  1    2    3    4    5    6    7    8    9    0    -    =    bspc 
+  tab  q    w    e    r    t    y    u    i    o    p    [    ]    \
+  caps a    s    d    f    g    h    j    k    l    ;    '    ret     
+  lsft z    x    c    v    b    n    m    ,    .    /    rsft        
+  lctl lmet lalt           spc                 ralt rmet cmp  rctl  
+)
+
+(deflayer default
+  esc  f1   f2   f3   f4   f5   f6   f7   f8   f9   f10  f11  f12
+  $    +    [    {    \(    &    =    \)    }    ]    *    !    |    bspc
+  tab  ;    ,    .    p    y    f    g    c    r    l    /    @    \
+  caps a    o    e    u    i    d    h    t    n    s    -    ret
+  @shift '    q    j    k    x    b    m    w    v    z    rsft
+  lctl lmet lalt           spc            ralt rmet cmp  rctl
+)
+
+
+(deflayer shift
+  esc  f1   f2   f3   f4   f5   f6   f7   f8   f9   f10  f11  f12
+  ~    1    2    3    4    5    6    7    8    9    0    %    `    bspc
+  tab  :    <    >    P    Y    F    G    C    R    L    ?    ^    #
+  caps A    O    E    U    I    D    H    T    N    S    _    ret
+  lsft "    Q    J    K    X    B    M    W    V    Z    rsft
+  lctl lmet lalt           spc            ralt rmet cmp  rctl
+)
+
+(defalias
+  shift (layer-toggle shift)
+)
+
diff --git a/dotfiles/nvim/.config/nvim/.gitignore b/dotfiles/nvim/.config/nvim/.gitignore
new file mode 100644
index 0000000..cc5457a
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/.gitignore
@@ -0,0 +1,8 @@
+tt.*
+.tests
+doc/tags
+debug
+.repro
+foo.*
+*.log
+data
diff --git a/dotfiles/nvim/.config/nvim/.neoconf.json b/dotfiles/nvim/.config/nvim/.neoconf.json
new file mode 100644
index 0000000..7c48087
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/.neoconf.json
@@ -0,0 +1,15 @@
+{
+  "neodev": {
+    "library": {
+      "enabled": true,
+      "plugins": true
+    }
+  },
+  "neoconf": {
+    "plugins": {
+      "lua_ls": {
+        "enabled": true
+      }
+    }
+  }
+}
diff --git a/dotfiles/nvim/.config/nvim/LICENSE b/dotfiles/nvim/.config/nvim/LICENSE
new file mode 100644
index 0000000..261eeb9
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/LICENSE
@@ -0,0 +1,201 @@
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "[]"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright [yyyy] [name of copyright owner]
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.
diff --git a/dotfiles/nvim/.config/nvim/README.md b/dotfiles/nvim/.config/nvim/README.md
new file mode 100644
index 0000000..185280b
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/README.md
@@ -0,0 +1,4 @@
+# 💤 LazyVim
+
+A starter template for [LazyVim](https://github.com/LazyVim/LazyVim).
+Refer to the [documentation](https://lazyvim.github.io/installation) to get started.
diff --git a/dotfiles/nvim/.config/nvim/init.lua b/dotfiles/nvim/.config/nvim/init.lua
new file mode 100644
index 0000000..2514f9e
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/init.lua
@@ -0,0 +1,2 @@
+-- bootstrap lazy.nvim, LazyVim and your plugins
+require("config.lazy")
diff --git a/dotfiles/nvim/.config/nvim/lazy-lock.json b/dotfiles/nvim/.config/nvim/lazy-lock.json
new file mode 100644
index 0000000..2e113a5
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lazy-lock.json
@@ -0,0 +1,84 @@
+{
+  "LazyVim": { "branch": "main", "commit": "12818a6cb499456f4903c5d8e68af43753ebc869" },
+  "SchemaStore.nvim": { "branch": "main", "commit": "b546852f7a477276805b01f84ac79c28a962c55b" },
+  "bufferline.nvim": { "branch": "main", "commit": "0b2fd861eee7595015b6561dade52fb060be10c4" },
+  "catppuccin": { "branch": "main", "commit": "4fd72a9ab64b393c2c22b168508fd244877fec96" },
+  "cmp-buffer": { "branch": "main", "commit": "3022dbc9166796b644a841a02de8dd1cc1d311fa" },
+  "cmp-git": { "branch": "main", "commit": "50d526dff0f6bc441b51fc269d9fdc99a50c76af" },
+  "cmp-nvim-lsp": { "branch": "main", "commit": "39e2eda76828d88b773cc27a3f61d2ad782c922d" },
+  "cmp-path": { "branch": "main", "commit": "91ff86cd9c29299a64f968ebb45846c485725f23" },
+  "conform.nvim": { "branch": "master", "commit": "936f2413e6c57185cd873623a29a0685bce4b423" },
+  "copilot-cmp": { "branch": "master", "commit": "b6e5286b3d74b04256d0a7e3bd2908eabec34b44" },
+  "copilot.lua": { "branch": "master", "commit": "1a237cf50372830a61d92b0adf00d3b23882e0e1" },
+  "crates.nvim": { "branch": "main", "commit": "b3b9ac6ed9618955b24bf9adede7530ef608495b" },
+  "dashboard-nvim": { "branch": "master", "commit": "fabf5feec96185817c732d47d363f34034212685" },
+  "dial.nvim": { "branch": "master", "commit": "ed4d6a5bbd5e479b4c4a3019d148561a2e6c1490" },
+  "flash.nvim": { "branch": "main", "commit": "25ba3f4d1e0b080213b39518ebcfbb693a23c957" },
+  "friendly-snippets": { "branch": "main", "commit": "00ebcaa159e817150bd83bfe2d51fa3b3377d5c4" },
+  "fzf-lua": { "branch": "main", "commit": "f39de2d77755e90a7a80989b007f0bf2ca13b0dd" },
+  "gitsigns.nvim": { "branch": "main", "commit": "1ef74b546732f185d0f806860fa5404df7614f28" },
+  "grug-far.nvim": { "branch": "main", "commit": "76d86580f71bd2f07d4264c782ab8d1c12302e13" },
+  "inc-rename.nvim": { "branch": "main", "commit": "8ba77017ca468f3029bf88ef409c2d20476ea66b" },
+  "indent-blankline.nvim": { "branch": "master", "commit": "18603eb949eba08300799f64027af11ef922283f" },
+  "kmonad-vim": { "branch": "master", "commit": "37978445197ab00edeb5b731e9ca90c2b141723f" },
+  "lazy.nvim": { "branch": "main", "commit": "077102c5bfc578693f12377846d427f49bc50076" },
+  "lazydev.nvim": { "branch": "main", "commit": "491452cf1ca6f029e90ad0d0368848fac717c6d2" },
+  "leetcode.nvim": { "branch": "master", "commit": "02fb2c855658ad6b60e43671f6b040c812181a1d" },
+  "lualine.nvim": { "branch": "master", "commit": "b431d228b7bbcdaea818bdc3e25b8cdbe861f056" },
+  "luvit-meta": { "branch": "main", "commit": "ce76f6f6cdc9201523a5875a4471dcfe0186eb60" },
+  "markdown-preview.nvim": { "branch": "master", "commit": "a923f5fc5ba36a3b17e289dc35dc17f66d0548ee" },
+  "markdown.nvim": { "branch": "main", "commit": "a5e2d0b1215814c3d033be1fd8eccf59ce366399" },
+  "mason-lspconfig.nvim": { "branch": "main", "commit": "25c11854aa25558ee6c03432edfa0df0217324be" },
+  "mason-nvim-dap.nvim": { "branch": "main", "commit": "8b9363d83b5d779813cdd2819b8308651cec2a09" },
+  "mason.nvim": { "branch": "main", "commit": "e2f7f9044ec30067bc11800a9e266664b88cda22" },
+  "mini.ai": { "branch": "main", "commit": "40e380a589d07ec2c856940c6422aafe5d949a0d" },
+  "mini.hipatterns": { "branch": "main", "commit": "fdad87bf545aec5210ca9a2c49fddf6284d72d1e" },
+  "mini.icons": { "branch": "main", "commit": "2d89252993fec829b24720097a687412d10f6c85" },
+  "mini.pairs": { "branch": "main", "commit": "e543c760edc5e746e5b6cbd02c066c17ead3ef16" },
+  "mini.surround": { "branch": "main", "commit": "0e67c4bc147f2a15cee94e7c94dcc0e115b9f55e" },
+  "neo-tree.nvim": { "branch": "main", "commit": "0774fa2085c62a147fcc7b56f0ac37053cc80217" },
+  "neotest": { "branch": "master", "commit": "6d6ad113f56edc7c3f2a77a0836ea8c1b955ebea" },
+  "neotest-golang": { "branch": "main", "commit": "3a258b6e58ada91f8af95b445b6156c2290d0e06" },
+  "neotest-python": { "branch": "master", "commit": "72603dfdbaad5695160268cb10531a14cc37236e" },
+  "nightfox.nvim": { "branch": "main", "commit": "7557f26defd093c4e9bc17f28b08403f706f5a44" },
+  "noice.nvim": { "branch": "main", "commit": "5fd435c3c6c70d1fe79923593124aa0d52534bc1" },
+  "nui.nvim": { "branch": "main", "commit": "61574ce6e60c815b0a0c4b5655b8486ba58089a1" },
+  "nvim-cmp": { "branch": "main", "commit": "ae644feb7b67bf1ce4260c231d1d4300b19c6f30" },
+  "nvim-dap": { "branch": "master", "commit": "20a4859ebde1c9bc8e96f8cc11a20667e7fdd516" },
+  "nvim-dap-go": { "branch": "main", "commit": "5511788255c92bdd845f8d9690f88e2e0f0ff9f2" },
+  "nvim-dap-python": { "branch": "master", "commit": "db72bf6ab9f75fe841e8e11e772ee7fef6f484f1" },
+  "nvim-dap-ui": { "branch": "master", "commit": "1c351e4e417d4691da12948b6ecf966936a56d28" },
+  "nvim-dap-virtual-text": { "branch": "master", "commit": "3497eb39bf413a57ab5b7e7e2e192683e462148c" },
+  "nvim-lint": { "branch": "master", "commit": "a7ce9c78a7c710c28bee56dfab10a5c0c80b7fb5" },
+  "nvim-lspconfig": { "branch": "master", "commit": "056f569f71e4b726323b799b9cfacc53653bceb3" },
+  "nvim-nio": { "branch": "master", "commit": "a428f309119086dc78dd4b19306d2d67be884eee" },
+  "nvim-notify": { "branch": "master", "commit": "d333b6f167900f6d9d42a59005d82919830626bf" },
+  "nvim-snippets": { "branch": "main", "commit": "56b4052f71220144689caaa2e5b66222ba5661eb" },
+  "nvim-treesitter": { "branch": "master", "commit": "6a3c6a42a6e24414bdf337b05a84a0ea013dd155" },
+  "nvim-treesitter-textobjects": { "branch": "master", "commit": "bf8d2ad35d1d1a687eae6c065c3d524f7ab61b23" },
+  "nvim-ts-autotag": { "branch": "main", "commit": "e239a560f338be31337e7abc3ee42515daf23f5e" },
+  "nvim-web-devicons": { "branch": "master", "commit": "9793801f974bba70e4ac5d7eae6c4f5659993d8e" },
+  "octo.nvim": { "branch": "master", "commit": "fd50872494abd1cb580c604f1f52aae2257f7220" },
+  "one-small-step-for-vimkind": { "branch": "main", "commit": "0f0d5bc67786c36edc2cb6fb5faa5c09dd1a6e10" },
+  "overseer.nvim": { "branch": "master", "commit": "236e60cdac6410dd95ea5cecafdb801a304d6a41" },
+  "persistence.nvim": { "branch": "main", "commit": "f6aad7dde7fcf54148ccfc5f622c6d5badd0cc3d" },
+  "plenary.nvim": { "branch": "master", "commit": "ec289423a1693aeae6cd0d503bac2856af74edaa" },
+  "presence.nvim": { "branch": "main", "commit": "87c857a56b7703f976d3a5ef15967d80508df6e6" },
+  "rustaceanvim": { "branch": "master", "commit": "047f9c9d8cd2861745eb9de6c1570ee0875aa795" },
+  "tailwindcss-colorizer-cmp.nvim": { "branch": "main", "commit": "3d3cd95e4a4135c250faf83dd5ed61b8e5502b86" },
+  "telescope.nvim": { "branch": "master", "commit": "5972437de807c3bc101565175da66a1aa4f8707a" },
+  "todo-comments.nvim": { "branch": "main", "commit": "319c01b99b7a8c9ac2066bf0efd4d6ec68fef444" },
+  "tokyonight.nvim": { "branch": "main", "commit": "4b386e66a9599057587c30538d5e6192e3d1c181" },
+  "trouble.nvim": { "branch": "main", "commit": "6efc446226679fda0547c0fd6a7892fd5f5b15d8" },
+  "ts-comments.nvim": { "branch": "main", "commit": "98d7d4dec0af1312d38e288f800bbf6ff562b6ab" },
+  "venv-selector.nvim": { "branch": "regexp", "commit": "c9d638f76ec9e31a46839d6bc12677dbafd73389" },
+  "vim-be-good": { "branch": "master", "commit": "4fa57b7957715c91326fcead58c1fa898b9b3625" },
+  "vim-dadbod": { "branch": "master", "commit": "7888cb7164d69783d3dce4e0283decd26b82538b" },
+  "vim-dadbod-completion": { "branch": "master", "commit": "880f7e9f2959e567c718d52550f9fae1aa07aa81" },
+  "vim-dadbod-ui": { "branch": "master", "commit": "a5ff8bd69fcaf53cd24827b54492c8ce87806d18" },
+  "vim-suda": { "branch": "master", "commit": "b97fab52f9cdeabe2bbb5eb98d82356899f30829" },
+  "vim-tmux-navigator": { "branch": "master", "commit": "5b3c701686fb4e6629c100ed32e827edf8dad01e" },
+  "vim-wakatime": { "branch": "master", "commit": "53bba6bb8342de9cbdafc82142a9b5e82008d858" },
+  "which-key.nvim": { "branch": "main", "commit": "bfec3d6bc0a9b0b2cb11644642f78c2c3915eef0" },
+  "yanky.nvim": { "branch": "main", "commit": "73215b77d22ebb179cef98e7e1235825431d10e4" }
+}
diff --git a/dotfiles/nvim/.config/nvim/lazyvim.json b/dotfiles/nvim/.config/nvim/lazyvim.json
new file mode 100644
index 0000000..a9d1eb7
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lazyvim.json
@@ -0,0 +1,35 @@
+{
+  "extras": [
+    "lazyvim.plugins.extras.coding.mini-surround",
+    "lazyvim.plugins.extras.coding.yanky",
+    "lazyvim.plugins.extras.dap.core",
+    "lazyvim.plugins.extras.dap.nlua",
+    "lazyvim.plugins.extras.editor.dial",
+    "lazyvim.plugins.extras.editor.fzf",
+    "lazyvim.plugins.extras.editor.inc-rename",
+    "lazyvim.plugins.extras.editor.overseer",
+    "lazyvim.plugins.extras.lang.docker",
+    "lazyvim.plugins.extras.lang.git",
+    "lazyvim.plugins.extras.lang.go",
+    "lazyvim.plugins.extras.lang.json",
+    "lazyvim.plugins.extras.lang.markdown",
+    "lazyvim.plugins.extras.lang.nix",
+    "lazyvim.plugins.extras.lang.php",
+    "lazyvim.plugins.extras.lang.python",
+    "lazyvim.plugins.extras.lang.rust",
+    "lazyvim.plugins.extras.lang.sql",
+    "lazyvim.plugins.extras.lang.svelte",
+    "lazyvim.plugins.extras.lang.tailwind",
+    "lazyvim.plugins.extras.lang.toml",
+    "lazyvim.plugins.extras.lang.yaml",
+    "lazyvim.plugins.extras.test.core",
+    "lazyvim.plugins.extras.util.dot",
+    "lazyvim.plugins.extras.util.gitui",
+    "lazyvim.plugins.extras.util.mini-hipatterns",
+    "lazyvim.plugins.extras.util.octo"
+  ],
+  "news": {
+    "NEWS.md": "6520"
+  },
+  "version": 6
+}
\ No newline at end of file
diff --git a/dotfiles/nvim/.config/nvim/lua/config/autocmds.lua b/dotfiles/nvim/.config/nvim/lua/config/autocmds.lua
new file mode 100644
index 0000000..27e9e06
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/config/autocmds.lua
@@ -0,0 +1,3 @@
+-- Autocmds are automatically loaded on the VeryLazy event
+-- Default autocmds that are always set: https://github.com/LazyVim/LazyVim/blob/main/lua/lazyvim/config/autocmds.lua
+-- Add any additional autocmds here
diff --git a/dotfiles/nvim/.config/nvim/lua/config/core/keymaps.lua b/dotfiles/nvim/.config/nvim/lua/config/core/keymaps.lua
new file mode 100644
index 0000000..e50449a
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/config/core/keymaps.lua
@@ -0,0 +1,14 @@
+vim.g.mapleader = " "
+
+local km = vim.keymap
+
+
+-- Visual Mode --
+km.set("v", "J", ":m '>+1<CR>gv=gv")
+km.set("v", "K", ":m '<-2<CR>gv=gv")
+
+-- Normal Mode -- 
+-- Window
+km.set("n", "<leader>sv", "<C-w>v")
+km.set("n", "<leader>sh", "<C-w>s")
+
diff --git a/dotfiles/nvim/.config/nvim/lua/config/core/options.lua b/dotfiles/nvim/.config/nvim/lua/config/core/options.lua
new file mode 100644
index 0000000..7c8c97f
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/config/core/options.lua
@@ -0,0 +1,27 @@
+local opt = vim.opt
+
+opt.relativenumber = ture
+opt.number = true
+
+opt.tabstop = 2
+opt.shiftwidth = 2
+opt.expandtab = true
+opt.autoindent = true
+
+
+opt.wrap = false
+
+opt.cursorline = ture
+
+opt.mouse:append("a")
+
+opt.clipboard:append("unnamedplus")
+
+opt.splitright = true
+opt.splitbelow = true
+
+opt.ignorecase = true
+opt.smartcase = true
+
+opt.termguicolors = true
+opt.signcolumn = "yes"
diff --git a/dotfiles/nvim/.config/nvim/lua/config/keymaps.lua b/dotfiles/nvim/.config/nvim/lua/config/keymaps.lua
new file mode 100644
index 0000000..50429a3
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/config/keymaps.lua
@@ -0,0 +1,4 @@
+-- Keymaps are automatically loaded on the VeryLazy event
+-- Default keymaps that are always set: https://github.com/LazyVim/LazyVim/blob/main/lua/lazyvim/config/keymaps.lua
+-- Add any additional keymaps here
+require("config.core.keymaps")
diff --git a/dotfiles/nvim/.config/nvim/lua/config/lazy.lua b/dotfiles/nvim/.config/nvim/lua/config/lazy.lua
new file mode 100644
index 0000000..d73bfa1
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/config/lazy.lua
@@ -0,0 +1,53 @@
+local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
+if not (vim.uv or vim.loop).fs_stat(lazypath) then
+  local lazyrepo = "https://github.com/folke/lazy.nvim.git"
+  local out = vim.fn.system({ "git", "clone", "--filter=blob:none", "--branch=stable", lazyrepo, lazypath })
+  if vim.v.shell_error ~= 0 then
+    vim.api.nvim_echo({
+      { "Failed to clone lazy.nvim:\n", "ErrorMsg" },
+      { out, "WarningMsg" },
+      { "\nPress any key to exit..." },
+    }, true, {})
+    vim.fn.getchar()
+    os.exit(1)
+  end
+end
+vim.opt.rtp:prepend(lazypath)
+
+require("lazy").setup({
+  spec = {
+    -- add LazyVim and import its plugins
+    { "LazyVim/LazyVim", import = "lazyvim.plugins" },
+    -- import/override with your plugins
+    { import = "plugins" },
+  },
+  defaults = {
+    -- By default, only LazyVim plugins will be lazy-loaded. Your custom plugins will load during startup.
+    -- If you know what you're doing, you can set this to `true` to have all your custom plugins lazy-loaded by default.
+    lazy = false,
+    -- It's recommended to leave version=false for now, since a lot the plugin that support versioning,
+    -- have outdated releases, which may break your Neovim install.
+    version = false, -- always use the latest git commit
+    -- version = "*", -- try installing the latest stable version for plugins that support semver
+  },
+  install = { colorscheme = { "tokyonight", "habamax" } },
+  checker = {
+    enabled = true, -- check for plugin updates periodically
+    notify = false, -- notify on update
+  }, -- automatically check for plugin updates
+  performance = {
+    rtp = {
+      -- disable some rtp plugins
+      disabled_plugins = {
+        "gzip",
+        -- "matchit",
+        -- "matchparen",
+        -- "netrwPlugin",
+        "tarPlugin",
+        "tohtml",
+        "tutor",
+        "zipPlugin",
+      },
+    },
+  },
+})
diff --git a/dotfiles/nvim/.config/nvim/lua/config/options.lua b/dotfiles/nvim/.config/nvim/lua/config/options.lua
new file mode 100644
index 0000000..571cf75
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/config/options.lua
@@ -0,0 +1,4 @@
+-- Options are automatically loaded before lazy.nvim startup
+-- Default options that are always set: https://github.com/LazyVim/LazyVim/blob/main/lua/lazyvim/config/options.lua
+-- Add any additional options here
+require("config.core.options")
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/colorscheme.lua b/dotfiles/nvim/.config/nvim/lua/plugins/colorscheme.lua
new file mode 100644
index 0000000..ef8882d
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/colorscheme.lua
@@ -0,0 +1,13 @@
+return {
+  -- add gruvbox
+  -- { "ellisonleao/gruvbox.nvim" },
+
+  -- Configure LazyVim to load gruvbox
+  {
+    "LazyVim/LazyVim",
+    opts = {
+      -- colorscheme = "tokyonight-day",
+      colorscheme = "duskfox",
+    },
+  },
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/disabled.lua b/dotfiles/nvim/.config/nvim/lua/plugins/disabled.lua
new file mode 100644
index 0000000..ea010fe
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/disabled.lua
@@ -0,0 +1,7 @@
+return {
+  { "folke/noice.nvim", enabled = false },
+  {
+    "folke/flash.nvim",
+    enabled = false,
+  },
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/example.lua b/dotfiles/nvim/.config/nvim/lua/plugins/example.lua
new file mode 100644
index 0000000..4ad9825
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/example.lua
@@ -0,0 +1,193 @@
+-- since this is just an example spec, don't actually load anything here and return an empty spec
+-- stylua: ignore
+if true then return {} end
+
+-- every spec file under the "plugins" directory will be loaded automatically by lazy.nvim
+--
+-- In your plugin files, you can:
+-- * add extra plugins
+-- * disable/enabled LazyVim plugins
+-- * override the configuration of LazyVim plugins
+return {
+  -- add gruvbox
+  { "ellisonleao/gruvbox.nvim" },
+
+  -- Configure LazyVim to load gruvbox
+  {
+    "LazyVim/LazyVim",
+    opts = {
+      colorscheme = "gruvbox",
+    },
+  },
+
+  -- change trouble config
+  {
+    "folke/trouble.nvim",
+    -- opts will be merged with the parent spec
+    opts = { use_diagnostic_signs = true },
+  },
+
+  -- disable trouble
+  { "folke/trouble.nvim", enabled = false },
+
+  -- override nvim-cmp and add cmp-emoji
+  {
+    "hrsh7th/nvim-cmp",
+    dependencies = { "hrsh7th/cmp-emoji" },
+    ---@param opts cmp.ConfigSchema
+    opts = function(_, opts)
+      table.insert(opts.sources, { name = "emoji" })
+    end,
+  },
+
+  -- change some telescope options and a keymap to browse plugin files
+  {
+    "nvim-telescope/telescope.nvim",
+    keys = {
+      -- add a keymap to browse plugin files
+      -- stylua: ignore
+      {
+        "<leader>fp",
+        function() require("telescope.builtin").find_files({ cwd = require("lazy.core.config").options.root }) end,
+        desc = "Find Plugin File",
+      },
+    },
+    -- change some options
+    opts = {
+      defaults = {
+        layout_strategy = "horizontal",
+        layout_config = { prompt_position = "top" },
+        sorting_strategy = "ascending",
+        winblend = 0,
+      },
+    },
+  },
+
+  -- add pyright to lspconfig
+  {
+    "neovim/nvim-lspconfig",
+    ---@class PluginLspOpts
+    opts = {
+      ---@type lspconfig.options
+      servers = {
+        -- pyright will be automatically installed with mason and loaded with lspconfig
+        pyright = {},
+      },
+    },
+  },
+
+  -- add tsserver and setup with typescript.nvim instead of lspconfig
+  {
+    "neovim/nvim-lspconfig",
+    dependencies = {
+      "jose-elias-alvarez/typescript.nvim",
+      init = function()
+        require("lazyvim.util").lsp.on_attach(function(_, buffer)
+          -- stylua: ignore
+          vim.keymap.set( "n", "<leader>co", "TypescriptOrganizeImports", { buffer = buffer, desc = "Organize Imports" })
+          vim.keymap.set("n", "<leader>cR", "TypescriptRenameFile", { desc = "Rename File", buffer = buffer })
+        end)
+      end,
+    },
+    ---@class PluginLspOpts
+    opts = {
+      ---@type lspconfig.options
+      servers = {
+        -- tsserver will be automatically installed with mason and loaded with lspconfig
+        tsserver = {},
+      },
+      -- you can do any additional lsp server setup here
+      -- return true if you don't want this server to be setup with lspconfig
+      ---@type table<string, fun(server:string, opts:_.lspconfig.options):boolean?>
+      setup = {
+        -- example to setup with typescript.nvim
+        tsserver = function(_, opts)
+          require("typescript").setup({ server = opts })
+          return true
+        end,
+        -- Specify * to use this function as a fallback for any server
+        -- ["*"] = function(server, opts) end,
+      },
+    },
+  },
+
+  -- for typescript, LazyVim also includes extra specs to properly setup lspconfig,
+  -- treesitter, mason and typescript.nvim. So instead of the above, you can use:
+  { import = "lazyvim.plugins.extras.lang.typescript" },
+
+  -- add more treesitter parsers
+  {
+    "nvim-treesitter/nvim-treesitter",
+    opts = {
+      ensure_installed = {
+        "bash",
+        "html",
+        "javascript",
+        "json",
+        "lua",
+        "markdown",
+        "markdown_inline",
+        "python",
+        "query",
+        "regex",
+        "tsx",
+        "typescript",
+        "vim",
+        "yaml",
+      },
+    },
+  },
+
+  -- since `vim.tbl_deep_extend`, can only merge tables and not lists, the code above
+  -- would overwrite `ensure_installed` with the new value.
+  -- If you'd rather extend the default config, use the code below instead:
+  {
+    "nvim-treesitter/nvim-treesitter",
+    opts = function(_, opts)
+      -- add tsx and treesitter
+      vim.list_extend(opts.ensure_installed, {
+        "tsx",
+        "typescript",
+      })
+    end,
+  },
+
+  -- the opts function can also be used to change the default opts:
+  {
+    "nvim-lualine/lualine.nvim",
+    event = "VeryLazy",
+    opts = function(_, opts)
+      table.insert(opts.sections.lualine_x, "😄")
+    end,
+  },
+
+  -- or you can return new options to override all the defaults
+  {
+    "nvim-lualine/lualine.nvim",
+    event = "VeryLazy",
+    opts = function()
+      return {
+        --[[add your custom lualine config here]]
+      }
+    end,
+  },
+
+  -- use mini.starter instead of alpha
+  { import = "lazyvim.plugins.extras.ui.mini-starter" },
+
+  -- add jsonls and schemastore packages, and setup treesitter for json, json5 and jsonc
+  { import = "lazyvim.plugins.extras.lang.json" },
+
+  -- add any tools you want to have installed below
+  {
+    "williamboman/mason.nvim",
+    opts = {
+      ensure_installed = {
+        "stylua",
+        "shellcheck",
+        "shfmt",
+        "flake8",
+      },
+    },
+  },
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/kmonad.lua b/dotfiles/nvim/.config/nvim/lua/plugins/kmonad.lua
new file mode 100644
index 0000000..540ecf7
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/kmonad.lua
@@ -0,0 +1,3 @@
+return {
+  "kmonad/kmonad-vim",
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/leetcode.lua b/dotfiles/nvim/.config/nvim/lua/plugins/leetcode.lua
new file mode 100644
index 0000000..96d2f37
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/leetcode.lua
@@ -0,0 +1,22 @@
+return {
+  {
+    "kawre/leetcode.nvim",
+    build = ":TSUpdate html",
+    dependencies = {
+      "nvim-telescope/telescope.nvim",
+      "nvim-lua/plenary.nvim", -- required by telescope
+      "MunifTanjim/nui.nvim",
+
+      -- optional
+      "nvim-treesitter/nvim-treesitter",
+      "rcarriga/nvim-notify",
+      "nvim-tree/nvim-web-devicons",
+    },
+    opts = {
+      -- configuration goes here
+      ---@type lc.lang
+      -- lang = "rust",
+      lang = "golang",
+    },
+  },
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/neo-tree.lua b/dotfiles/nvim/.config/nvim/lua/plugins/neo-tree.lua
new file mode 100644
index 0000000..29adf3a
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/neo-tree.lua
@@ -0,0 +1,24 @@
+return {
+  "nvim-neo-tree/neo-tree.nvim",
+  opts = {
+    filesystem = {
+      filtered_items = {
+        hide_dotfiles = false,
+        hide_gitignored = false,
+        visible = true,
+      },
+    },
+    event_handlers = {
+      -- {
+      --   event = "after_render",
+      --   handler = function()
+      --     local state = require("neo-tree.sources.manager").get_state("filesystem")
+      --     if not require("neo-tree.sources.common.preview").is_active() then
+      --       state.config = { use_float = false } -- or whatever your config is
+      --       state.commands.toggle_preview(state)
+      --     end
+      --   end,
+      -- },
+    },
+  },
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/nightfox.lua b/dotfiles/nvim/.config/nvim/lua/plugins/nightfox.lua
new file mode 100644
index 0000000..e48fa6e
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/nightfox.lua
@@ -0,0 +1,8 @@
+return {
+  {
+    "EdenEast/nightfox.nvim",
+    opts = {
+      transparent = true,
+    },
+  },
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/noice.lua b/dotfiles/nvim/.config/nvim/lua/plugins/noice.lua
new file mode 100644
index 0000000..b020cf7
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/noice.lua
@@ -0,0 +1,10 @@
+return {
+  {
+    "folke/noice.nvim",
+    config = {
+      cmdline = {
+        view = "cmdline",
+      },
+    },
+  },
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/nvim-cmp.lua b/dotfiles/nvim/.config/nvim/lua/plugins/nvim-cmp.lua
new file mode 100644
index 0000000..d8c93f3
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/nvim-cmp.lua
@@ -0,0 +1,84 @@
+return {
+  "hrsh7th/nvim-cmp",
+  version = false, -- last release is way too old
+  event = "InsertEnter",
+  dependencies = {
+    "hrsh7th/cmp-nvim-lsp",
+    "hrsh7th/cmp-buffer",
+    "hrsh7th/cmp-path",
+  },
+  -- Not all LSP servers add brackets when completing a function.
+  -- To better deal with this, LazyVim adds a custom option to cmp,
+  -- that you can configure. For example:
+  --
+  -- ```lua
+  -- opts = {
+  --   auto_brackets = { "python" }
+  -- }
+  -- ```
+  opts = function()
+    vim.api.nvim_set_hl(0, "CmpGhostText", { link = "Comment", default = true })
+    local cmp = require("cmp")
+    local defaults = require("cmp.config.default")()
+    local auto_select = true
+    return {
+      auto_brackets = {}, -- configure any filetype to auto add brackets
+      completion = {
+        completeopt = "menu,menuone,noinsert" .. (auto_select and "" or ",noselect"),
+      },
+      preselect = auto_select and cmp.PreselectMode.Item or cmp.PreselectMode.None,
+      mapping = cmp.mapping.preset.insert({
+        ["<C-b>"] = cmp.mapping.scroll_docs(-4),
+        ["<C-f>"] = cmp.mapping.scroll_docs(4),
+        ["<C-Space>"] = cmp.mapping.complete(),
+        ["<CR>"] = LazyVim.cmp.confirm({ select = auto_select }),
+        ["<C-y>"] = LazyVim.cmp.confirm({ select = true }),
+        ["<C-j>"] = cmp.mapping.select_next_item(),
+        ["<C-k>"] = cmp.mapping.select_prev_item(),
+        ["<Tab>"] = cmp.mapping.confirm(),
+        ["<S-CR>"] = LazyVim.cmp.confirm({ behavior = cmp.ConfirmBehavior.Replace }), -- Accept currently selected item. Set `select` to `false` to only confirm explicitly selected items.
+        ["<C-CR>"] = function(fallback)
+          cmp.abort()
+          fallback()
+        end,
+      }),
+      sources = cmp.config.sources({
+        { name = "nvim_lsp" },
+        { name = "path" },
+        { name = "snippets" },
+        { name = "git" },
+        { name = "copilot" },
+      }, {
+        { name = "buffer" },
+      }),
+      formatting = {
+        format = function(entry, item)
+          local icons = LazyVim.config.icons.kinds
+          if icons[item.kind] then
+            item.kind = icons[item.kind] .. item.kind
+          end
+
+          local widths = {
+            abbr = vim.g.cmp_widths and vim.g.cmp_widths.abbr or 40,
+            menu = vim.g.cmp_widths and vim.g.cmp_widths.menu or 30,
+          }
+
+          for key, width in pairs(widths) do
+            if item[key] and vim.fn.strdisplaywidth(item[key]) > width then
+              item[key] = vim.fn.strcharpart(item[key], 0, width - 1) .. "…"
+            end
+          end
+
+          return item
+        end,
+      },
+      experimental = {
+        ghost_text = {
+          hl_group = "CmpGhostText",
+        },
+      },
+      sorting = defaults.sorting,
+    }
+  end,
+  main = "lazyvim.util.cmp",
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/nvim-notify.lua b/dotfiles/nvim/.config/nvim/lua/plugins/nvim-notify.lua
new file mode 100644
index 0000000..1581362
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/nvim-notify.lua
@@ -0,0 +1,6 @@
+return {
+  "rcarriga/nvim-notify",
+  opts = {
+    timeout = 10000,
+  },
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/presence.lua b/dotfiles/nvim/.config/nvim/lua/plugins/presence.lua
new file mode 100644
index 0000000..f398219
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/presence.lua
@@ -0,0 +1,6 @@
+return {
+  {
+    "andweeb/presence.nvim",
+    -- very_lazy = true,
+  },
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/suda.lua b/dotfiles/nvim/.config/nvim/lua/plugins/suda.lua
new file mode 100644
index 0000000..cbe197b
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/suda.lua
@@ -0,0 +1,5 @@
+return {
+  {
+    "lambdalisue/vim-suda",
+  },
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/tmux-vim.lua b/dotfiles/nvim/.config/nvim/lua/plugins/tmux-vim.lua
new file mode 100644
index 0000000..ce695d8
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/tmux-vim.lua
@@ -0,0 +1,19 @@
+return {
+  {
+    "christoomey/vim-tmux-navigator",
+    cmd = {
+      "TmuxNavigateLeft",
+      "TmuxNavigateDown",
+      "TmuxNavigateUp",
+      "TmuxNavigateRight",
+      "TmuxNavigatePrevious",
+    },
+    keys = {
+      { "<c-h>", "<cmd><C-U>TmuxNavigateLeft<cr>" },
+      { "<c-j>", "<cmd><C-U>TmuxNavigateDown<cr>" },
+      { "<c-k>", "<cmd><C-U>TmuxNavigateUp<cr>" },
+      { "<c-l>", "<cmd><C-U>TmuxNavigateRight<cr>" },
+      { "<c-\\>", "<cmd><C-U>TmuxNavigatePrevious<cr>" },
+    },
+  },
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/tokyonight.lua b/dotfiles/nvim/.config/nvim/lua/plugins/tokyonight.lua
new file mode 100644
index 0000000..ecd9093
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/tokyonight.lua
@@ -0,0 +1,13 @@
+return {
+  {
+    "folke/tokyonight.nvim",
+    opts = {
+      transparent = true,
+      styles = {
+        sidebars = "transparent",
+        floats = "transparent",
+      },
+      day_brightness = 0.1,
+    },
+  },
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/vim-be-good.lua b/dotfiles/nvim/.config/nvim/lua/plugins/vim-be-good.lua
new file mode 100644
index 0000000..c31a787
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/vim-be-good.lua
@@ -0,0 +1,3 @@
+return {
+  "ThePrimeagen/vim-be-good",
+}
diff --git a/dotfiles/nvim/.config/nvim/lua/plugins/wakatime.lua b/dotfiles/nvim/.config/nvim/lua/plugins/wakatime.lua
new file mode 100644
index 0000000..83b5793
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/lua/plugins/wakatime.lua
@@ -0,0 +1,3 @@
+return {
+  { "wakatime/vim-wakatime", lazy = false },
+}
diff --git a/dotfiles/nvim/.config/nvim/stylua.toml b/dotfiles/nvim/.config/nvim/stylua.toml
new file mode 100644
index 0000000..5d6c50d
--- /dev/null
+++ b/dotfiles/nvim/.config/nvim/stylua.toml
@@ -0,0 +1,3 @@
+indent_type = "Spaces"
+indent_width = 2
+column_width = 120
\ No newline at end of file
diff --git a/dotfiles/tmux/.tmux.conf b/dotfiles/tmux/.tmux.conf
new file mode 100644
index 0000000..cd9f1f3
--- /dev/null
+++ b/dotfiles/tmux/.tmux.conf
@@ -0,0 +1,24 @@
+# List of plugins
+set -g @plugin 'tmux-plugins/tpm'
+set -g @plugin 'tmux-plugins/tmux-sensible'
+# set -g @plugin 'catppuccin/tmux'
+set -g @plugin 'odedlaz/tmux-onedark-theme'
+set -g @plugin 'christoomey/vim-tmux-navigator'
+setw -g mode-keys vi
+set -g mouse on
+set -g base-index 1
+setw -g pane-base-index 1
+
+bind -T copy-mode-vi v send -X begin-selection
+bind -T copy-mode-vi y send-keys -X copy-pipe-and-cancel "pbcopy"
+bind P paste-buffer
+bind -T copy-mode-vi MouseDragEnd1Pane send-keys -X copy-pipe-and-cancel "pbcopy"
+# Other examples:
+# set -g @plugin 'github_username/plugin_name'
+# set -g @plugin 'github_username/plugin_name#branch'
+# set -g @plugin 'git@github.com:user/plugin'
+# set -g @plugin 'git@bitbucket.com:user/plugin'
+
+
+# Initialize TMUX plugin manager (keep this line at the very bottom of tmux.conf)
+run '~/.tmux/plugins/tpm/tpm'
diff --git a/dotfiles/zshrc/.zshrc b/dotfiles/zshrc/.zshrc
new file mode 100644
index 0000000..132c6d1
--- /dev/null
+++ b/dotfiles/zshrc/.zshrc
@@ -0,0 +1,189 @@
+# Add deno completions to search path
+if [[ ":$FPATH:" != *":/home/fabric/.zsh/completions:"* ]]; then export FPATH="/home/fabric/.zsh/completions:$FPATH"; fi
+# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
+# Initialization code that may require console input (password prompts, [y/n]
+# confirmations, etc.) must go above this block; everything else may go below.
+# if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
+  # source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+# fi
+
+# If you come from bash you might have to change your $PATH.
+# export PATH=$HOME/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+# Path to your Oh My Zsh installation.
+export ZSH="$HOME/.oh-my-zsh"
+
+# Set name of the theme to load --- if set to "random", it will
+# load a random theme each time Oh My Zsh is loaded, in which case,
+# to know which specific one was loaded, run: echo $RANDOM_THEME
+# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
+ZSH_THEME="powerlevel10k/powerlevel10k"
+
+# Set list of themes to pick from when loading at random
+# Setting this variable when ZSH_THEME=random will cause zsh to load
+# a theme from this variable instead of looking in $ZSH/themes/
+# If set to an empty array, this variable will have no effect.
+# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )
+
+# Uncomment the following line to use case-sensitive completion.
+# CASE_SENSITIVE="true"
+
+# Uncomment the following line to use hyphen-insensitive completion.
+# Case-sensitive completion must be off. _ and - will be interchangeable.
+# HYPHEN_INSENSITIVE="true"
+
+# Uncomment one of the following lines to change the auto-update behavior
+# zstyle ':omz:update' mode disabled  # disable automatic updates
+# zstyle ':omz:update' mode auto      # update automatically without asking
+# zstyle ':omz:update' mode reminder  # just remind me to update when it's time
+
+# Uncomment the following line to change how often to auto-update (in days).
+# zstyle ':omz:update' frequency 13
+
+# Uncomment the following line if pasting URLs and other text is messed up.
+# DISABLE_MAGIC_FUNCTIONS="true"
+
+# Uncomment the following line to disable colors in ls.
+# DISABLE_LS_COLORS="true"
+
+# Uncomment the following line to disable auto-setting terminal title.
+# DISABLE_AUTO_TITLE="true"
+
+# Uncomment the following line to enable command auto-correction.
+# ENABLE_CORRECTION="true"
+
+# Uncomment the following line to display red dots whilst waiting for completion.
+# You can also set it to another string to have that shown instead of the default red dots.
+# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
+# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
+# COMPLETION_WAITING_DOTS="true"
+
+# Uncomment the following line if you want to disable marking untracked files
+# under VCS as dirty. This makes repository status check for large repositories
+# much, much faster.
+# DISABLE_UNTRACKED_FILES_DIRTY="true"
+
+# Uncomment the following line if you want to change the command execution time
+# stamp shown in the history command output.
+# You can set one of the optional three formats:
+# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
+# or set a custom format using the strftime function format specifications,
+# see 'man strftime' for details.
+# HIST_STAMPS="mm/dd/yyyy"
+
+# Would you like to use another custom folder than $ZSH/custom?
+# ZSH_CUSTOM=/path/to/new-custom-folder
+
+# Which plugins would you like to load?
+# Standard plugins can be found in $ZSH/plugins/
+# Custom plugins may be added to $ZSH_CUSTOM/plugins/
+# Example format: plugins=(rails git textmate ruby lighthouse)
+# Add wisely, as too many plugins slow down shell startup.
+plugins=(git
+    zsh-autosuggestions
+)
+
+fpath+=${ZSH_CUSTOM:-${ZSH:-~/.oh-my-zsh}/custom}/plugins/zsh-completions/src
+source $ZSH/oh-my-zsh.sh
+
+# User configuration
+
+# export MANPATH="/usr/local/man:$MANPATH"
+
+# You may need to manually set your language environment
+# export LANG=en_US.UTF-8
+
+# Preferred editor for local and remote sessions
+# if [[ -n $SSH_CONNECTION ]]; then
+#   export EDITOR='vim'
+# else
+#   export EDITOR='mvim'
+# fi
+
+# Compilation flags
+# export ARCHFLAGS="-arch x86_64"
+
+# Set personal aliases, overriding those provided by Oh My Zsh libs,
+# plugins, and themes. Aliases can be placed here, though Oh My Zsh
+# users are encouraged to define aliases within a top-level file in
+# the $ZSH_CUSTOM folder, with .zsh extension. Examples:
+# - $ZSH_CUSTOM/aliases.zsh
+# - $ZSH_CUSTOM/macos.zsh
+# For a full list of active aliases, run `alias`.
+#
+# Example aliases
+# alias zshconfig="mate ~/.zshrc"
+# alias ohmyzsh="mate ~/.oh-my-zsh"
+
+# >>> conda initialize >>>
+# !! Contents within this block are managed by 'conda init' !!
+__conda_setup="$('/Users/fabric/anaconda3/bin/conda' 'shell.zsh' 'hook' 2> /dev/null)"
+if [ $? -eq 0 ]; then
+    eval "$__conda_setup"
+else
+    if [ -f "/Users/fabric/anaconda3/etc/profile.d/conda.sh" ]; then
+        . "/Users/fabric/anaconda3/etc/profile.d/conda.sh"
+    else
+        export PATH="/Users/fabric/anaconda3/bin:$PATH"
+    fi
+fi
+unset __conda_setup
+# <<< conda initialize <<<
+
+function yy() {
+	local tmp="$(mktemp -t "yazi-cwd.XXXXXX")"
+	yazi "$@" --cwd-file="$tmp"
+	if cwd="$(cat -- "$tmp")" && [ -n "$cwd" ] && [ "$cwd" != "$PWD" ]; then
+		cd -- "$cwd"
+	fi
+	rm -f -- "$tmp"
+}
+
+# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
+
+if [[ -o interactive ]]; then
+    # Commands to run in interactive sessions can go here
+    neofetch
+    gitfetch
+fi
+
+source /usr/share/nvm/init-nvm.sh
+source /etc/profile.d/google-cloud-cli.sh
+export PYENV_ROOT="$HOME/.pyenv"
+[[ -d $PYENV_ROOT/bin ]] && export PATH="$PYENV_ROOT/bin:$PATH"
+eval "$(pyenv init -)"
+
+export GOPATH=$(go env GOPATH)
+export PATH=$PATH:$GOPATH/bin
+# alias air='$(go env GOPATH)/bin/air'
+# alias templ='$(go env GOPATH)/bin/templ'
+# alias energy='$(go env GOPATH)/bin/energy'
+
+# pnpm
+export PNPM_HOME="/home/fabric/.local/share/pnpm"
+case ":$PATH:" in
+  *":$PNPM_HOME:"*) ;;
+  *) export PATH="$PNPM_HOME:$PATH" ;;
+esac
+# pnpm end
+
+eval "$(/home/linuxbrew/.linuxbrew/bin/brew shellenv)"
+
+
+export ANDROID_HOME=${HOME}/Android/Sdk
+export PATH=${ANDROID_HOME}/tools:${PATH}
+export PATH=${ANDROID_HOME}/emulator:${PATH}
+export PATH=${ANDROID_HOME}/platform-tools:${PATH}
+export WEBKIT_DISABLE_DMABUF_RENDERER=1
+
+set -o vi
+export LD_LIBRARY_PATH=~/.local/share/cef
+export ENERGY_HOME=/home/fabric/cvim/energy/EnergyFramework
+export UPX_HOME=/home/fabric/cvim/energy/upx
+export PATH=$PATH:$UPX_HOME
+
+# Turso
+export PATH="$PATH:/home/fabric/.turso"
+
+. "$HOME/.local/bin/env"
+. "/home/fabric/.deno/env"
\ No newline at end of file
diff --git a/flake.lock b/flake.lock
new file mode 100644
index 0000000..4db5986
--- /dev/null
+++ b/flake.lock
@@ -0,0 +1,49 @@
+{
+  "nodes": {
+    "home-manager": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1734366194,
+        "narHash": "sha256-vykpJ1xsdkv0j8WOVXrRFHUAdp9NXHpxdnn1F4pYgSw=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "80b0fdf483c5d1cb75aaad909bd390d48673857f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "ref": "release-24.11",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1734323986,
+        "narHash": "sha256-m/lh6hYMIWDYHCAsn81CDAiXoT3gmxXI9J987W5tZrE=",
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "394571358ce82dff7411395829aa6a3aad45b907",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nixos",
+        "ref": "nixos-24.11",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "home-manager": "home-manager",
+        "nixpkgs": "nixpkgs"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}
diff --git a/flake.nix b/flake.nix
new file mode 100644
index 0000000..f4791be
--- /dev/null
+++ b/flake.nix
@@ -0,0 +1,29 @@
+{
+  description = "Fabric's flake";
+
+  inputs = {
+    nixpkgs.url = "github:nixos/nixpkgs?ref=nixos-24.11";
+    home-manager.url = "github:nix-community/home-manager/release-24.11";
+    home-manager.inputs.nixpkgs.follows = "nixpkgs";
+  };
+
+  outputs = { self, nixpkgs, home-manager, ...}: 
+    let
+      lib = nixpkgs.lib;
+      pkgs = nixpkgs.legacyPackages."x86_64-linux";
+    in {
+      nixosConfigurations = {
+        Tatara = lib.nixosSystem {
+          system = "x86_64-linux";
+          modules = [ ./configuration.nix ];
+        };
+      };
+
+      homeConfigurations = {
+        fabric = home-manager.lib.homeManagerConfiguration {
+          inherit pkgs;
+          modules = [ ./home.nix ];
+        };
+      };
+    };
+}
diff --git a/hardware-configuration.nix b/hardware-configuration.nix
new file mode 100644
index 0000000..5364690
--- /dev/null
+++ b/hardware-configuration.nix
@@ -0,0 +1,38 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [ (modulesPath + "/installer/scan/not-detected.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "usbhid" "usb_storage" "sd_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-amd" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/1cc325bd-91a6-4c69-9593-e2cb27363c93";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/EF24-B12A";
+      fsType = "vfat";
+      options = [ "fmask=0077" "dmask=0077" ];
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp5s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}
diff --git a/home.nix b/home.nix
new file mode 100644
index 0000000..ccfdbd3
--- /dev/null
+++ b/home.nix
@@ -0,0 +1,63 @@
+{ config, pkgs, ... }:
+
+{
+  nixpkgs.config = {
+    allowUnfree = true;
+  };
+  # Home Manager needs a bit of information about you and the paths it should
+  # manage.
+  home.username = "fabric";
+  home.homeDirectory = "/home/fabric";
+
+  home.stateVersion = "24.11"; 
+
+  home.packages = with pkgs; [
+    neovim
+    git
+    kitty
+    firefox
+    mpv
+    i3blocks
+    feh
+    maim
+    scrot
+    rofi
+    picom
+    nerdfonts
+    tmux
+    discord
+    fzf
+    yazi
+    zsh
+    flameshot
+    dunst
+    pavucontrol
+  ];
+
+  services = {
+      dunst = {
+          enable = true;
+          configFile = /home/fabric/.config/dunst/customDunstrc;
+        };
+    };
+
+  home.sessionVariables = {
+    EDITOR = "nvim";
+  };
+
+  xsession.windowManager.i3 = {
+  	enable = true;
+    extraConfig = builtins.readFile ./dotfiles/i3/.config/i3/config;
+  };
+
+  # Let Home Manager install and manage itself.
+  programs = {
+    home-manager.enable = true;
+    git = {
+      userName = "FabricSoul";
+      userEmail = "fabric.soul7@gmail.com";
+    };
+  };
+
+  fonts.fontconfig.enable = true;
+}